Advertisement
3
When the "Setup Wizard" requires a Device ID input, use one of the following:
[1] Remove the CMOD cap and find the QR code which is located
on the top of VXI-CMOD.
[2] Read the QR code label included in the package of the VXI-CMOD.
[3] Direct input to the OPTEX Vision.
4
Follow the "Setup Wizard" to join your Wi-Fi network.
- Record the Wi-Fi network SSID and password.
Note them on [1] [2] below.
Wi-Fi network
[1] SSID;
[2] Password;
- Place the Device ID QR code label on [3].
It is included in the package of VXI-CMOD.
[3] Device ID;
[3] Place the
QR code
label here
5
OPERATION CHECK
1
2
3
Device List
Live View
Check the VXI-CMOD is
Confirm the Live View
Try to record the Live View
displayed on the Device
through the VXI-CMOD.
onto the microSD card.
List.
6
ASSEMBLING
1
Remove the CMOD cap and mount the
VXI-CMOD on the camera mount.
<< How to use the OPTEX Vision App >>
1
Responding to an alarm
Receive SMS from a control
Start the OPTEX Vision application.
panel or App notification
Alarm !
3
Search stored events
Hereby, OPTEX declares that the radio equipment type VXI-CMOD is in compliance with
RED 2014/53/EU. The full text of the EU DoC is available at the following internet address;
EU DoC; www.optex.net
Optex VXI-CMOD shall be supplied by a SELV and LPS (or UL1310 class 2) power supply
or connected to a dedicated control unit with SELV and LPS output.
■
EU contact information
Authorised representative in Europe:
Manufacturer:
OPTEX CO., LTD.
OPTEX (EUROPE) LTD./EMEA HEADQUARTERS
5-8-12 Ogoto, Otsu,
Unit 13, Cordwallis Park, Clivemont Road,
Shiga, 520-0101 JAPAN
Maidenhead Berkshire, SL6 7BU U.K.
NOTE
The default password is 123456, which will need to be appropriately
changed upon setup.
For iOS only
The following information is required to change the
Wi-Fi network in the "Setup Wizard"
Wi-Fi direct
SSID; HD- xxxxxx *
12345678
Password;
* "xxxxxx" contains ramdom numbers that are common to
the part of the Device ID.
IMPORTANT
Reset to the factory default
- If the "Setup Wizard" procedure fails for any reason (e.g input wrong Wi-Fi
password), reset the unit by holding the "RESET" button for 10 seconds.
- Stored event data are not deleted by the reset operation.
4
Recording
Sensor trigger recording
Test the total operation of the VXI-ST/-AM/-DAM and VXI-CMOD.
Confirm that the event is recorded by the trigger of the VXI-ST/-AM/-DAM.
2
3
Fix the VXI-CMOD with the lock
Replace the CMOD cap.
screw.
2
Check live view
OPTEX INC./AMERICAS HQ (U.S.)
URL: www.optexamerica.com
OPTEX (EUROPE) LTD./EMEA HQ (U.K.)
URL: www.optex-europe.com
OPTEX TECHNOLOGIES B.V.
(The Netherlands)
URL: www.optex.eu
7
SPECIFICATIONS
7-1 DIMENSIONS
71
7-2 SPECIFICATIONS
Wireless connectivity
Data encryption
Security
Simultaneous viewers
Image sensor
Image resolution
Viewing angle
Minimum illumination
Front Door
Night vision
Live
Direct, N=1, Good, 127.3KB/s VGA
SD
Image compression
Image resolution
Frame rate
Recording period
Memory Storage
Power supply
Power consumption
Wake up time
Recording trigger
LED indicator
Microphone
IR Mode selector
Internal/ External
Location
Operating temperature
Operating humidity
IP rate
Weight
* Performance may be impacted when connecting to multiple smartphone simultaneously.
- Web service is subject to termination without prior notice.
- Specifications and designs are subject to change without prior notice.
OPTEX CO., LTD. (JAPAN)
URL: www.optex.net
- 2 -
NOTE
For installers
After the installation is complete, check the full operation of the
product. Explain to all users the operation of the product and
make sure that it is fully understood. Provide all users with a
copy of this "INSTALLATION & OPERATIONAL MANUAL"
for future reference.
For users
Upon completion ensure you are provided with comprehensive
training on this product. Keep a copy of this "INSTALLATION &
OPERATION MANUAL" for future reference.
Users are responsible to position the camera such a way
that it does not look into someone else s property.
106
Unit: mm
Model
VXI-CMOD
IEEE 802.11 b/g/n
AES 128-bit data encryption via proprietary P2P connection protocol
WEP/ WPA/ WPA2 (TKIP, 128-bit AES)
Max. 3 Concurrent viewers *
Full HD
1080P/720P/VGA (Selectable from App)
H: 180° V: 100°
0 lux. (with IR illumination)
IR LED with IR-Cut switcher
H.264 High profile
Full HD
15 FPS
30 sec. (inc. 2 s pre-record)
microSD card (32 GB max.)
Not included/ Only FAT 32 format compatible/ Formatable from OPTEX Vision App
9.5 to 24 V DC
IR low mode: 400 mA max./IR high mode: 1.0 A max. at 12 V DC
2 min.
Alarm, Tamper, Trouble (N.O./N.C.)
Power LED
1 input
high/low
Internal/ External selectable
antenna selector
External antenna [CMOD-ANT] is sold separately.
Outdoor/Indoor
-10℃ to +50℃
90% max. (Non condensed)
IP 55
280 g
4
Settings
OPTEX SECURITY SAS (France)
URL: www.optex-europe.com/fr
OPTEX SECURITY Sp.z o.o. (Poland)
URL: www.optex.com.pl
OPTEX PINNACLE INDIA,
PVT., LTD. (India)
URL: www.optexpinnacle.com
'
NOTE
123456
Default Admin Password is
.
It must be changed after the first access to "Settings" .
OPTEX KOREA CO.,LTD. (Korea)
URL: www.optexkorea.com
OPTEX (DONGGUAN) CO.,LTD.
SHANGHAI OFFICE (China)
URL: www.optexchina.com
OPTEX (Thailand) CO., LTD. (Thailand)
URL: www.optex.co.th
Copyright (C) 2018 OPTEX CO.,LTD.
Advertisement
