TANDBERG 1000 MXP User Manual page 195

TANDBERG 1000 MXP
5.8.2.8 IEEE 802.1x
802.1X
The system may be connected to an IEEE 802.1x LAN network. Supported 802.1x protocols are
EAP-MD5, EAP-PEAP and EAP-TTLS. The 802.1x authentication are enabled by setting 802.1x
Mode to On.
802.1x authentication enabled
On
802.1x authentication disabled
Off
Anonymous Identity
The 802.1x Anonymous ID string is to be used as unencrypted identity with EAP types that
support different tunneled identity, EAP-PEAP and EAP-TTLS. The anonymous ID, if set, will be
used for the initial (unencrypted) EAP Identity Request.
Identity
The 802.1x Username is the username needed for 802.1x authentication.
Password
The 802.1x Password is the password needed for 802.1x authentication.
EAP-MD5
The EAP-MD5 protocol is enabled
On
The EAP-MD5 protocol is disabled
Off
EAP_TTLS
The EAP_TTLS protocol is enabled
On
The EAP_TTLS protocol is disabled
Off
EAP-PEAP
The EAP_PEAP protocol is enabled
On
The EAP_PEAP protocol is disabled
Off
Note that 802.1x wireless LAN is not supported.
184