Troubleshooting - Kalorik Chambrer WineBar with Dual Zone Operating Instructions Manual

120v 60hz 96w
Table of Contents

Advertisement

Available languages

Available languages

All manuals and user guides at all-guides.com

Troubleshooting

You can easily solve many common problems by trying the
suggestions below:
SYMPTOM
No Power
Wireless Link Loss
Wireless Link LED
Light is on but no
temperature is
being displayed on
the temperature
display
The Wine Bar does
not cool enough
Water build-up in
Bottle Chamber
POSSIBLE CAUSE
Check to make sure the power cord is plugged into a
standard electrical outlet and that the power cord is securely
plugged into the bar of the Wine Bar
Check the batteries in Wireless Temperature Probe. Replace
if necessary
Environmental interference (microwaves, cell phones, etc.)
could be affecting the wireless communication. Please re-
orient the unit and try again.
Low Battery in the Wireless Probe Check the batteries in
Wireless Temperature Probe. Replace if necessary.
Environmental interference (microwaves, cell phones, etc.)
could be affecting the wireless communication. Please re-
orient the unit and try again.
The Wireless Probe is too far away from the Wine bar
Make sure the cooling vents on the back and sides of the
Wine Bar are not obstructed. Have at least 5 cm (2") of space
on back side and 20 cm on either side of the unit for proper
ventilation.
The unit will have difficulty in cooling if the set temperature is
16°C (29°F) below the ambient temperature.
Example: if the ambient temperature is 30°C (86°F), the unit
will have difficulty cooling to 14°C (57°F).
This is Normal operation of the unit. It is due to the
condensation of the moisture in the room's air. Please wipe
out the water with a dry clean cloth.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usk wcl 1

Table of Contents