General Settings - Psm - JVC KD-S33 Instructions Manual

2
Indication [Range]
1
BAS* (bass)
Adjust the bass. [–06 to +06]
1
TRE* (treble)
Adjust the treble. [–06 to +06]
2
FAD* (fader)
Adjust the front and rear speaker balance. [R06 to F06]
3
BAL* (balance)
Adjust the left and right speaker balance.
[L06 to R06]
1
LOUD* (loudness)
Boost low and high frequencies to produce a well-
balanced sound at low volume level. [LOUD ON or
LOUD OFF]
4
SUB.W* (subwoofer)
Adjust the subwoofer output level. [00 to 08]
VOL (volume)
Adjust the volume. [00 to 30 or 50*
1
* When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the currently
selected sound mode (C-EQ) including "USER."
* 2
If you are using a two-speaker system, set the fader
level to "00."
* 3
This adjustment cannot affect the subwoofer output.
* 4
This takes effect only when a subwoofer is connected.
Displayed only when "L/O MODE" is set to "WOOFER"
(see page 14).
* 5
Depending on the amplifier gain control setting. (See
page 14 for details.)
12
All manuals and user guides at all-guides.com
5
]
General settings — PSM
You can change PSM (Preferred Setting Mode) items
(except "SID") listed in the table that follows.
1
2
Select a PSM item.
Ex.: When "DIMMER" is selected
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.