Notification Of Beacon Or Message Arrival In A Pop-Up Screen Aprs Popup Function - Yaesu FT3Dr Instruction Manual

Notification of beacon or message arrival in a pop-up screen
APRS POPUP function
A notification can be set to appear in a pop-up display when an APRS beacon or message
is received from a partner station.
1
Press and hold the [DISP] key → Touch [APRS] → [9 APRS POPUP].
2
Turn the DIAL to select the item to be set
Refer to the list of set mode actions (page 48) for details of each item.
Mic-E / POSITION / WEATHER / OBJECT / ITEM / STATUS / OTHER / MY PACKET
/ MSG / GRP / BLN / MY MSG / DUP.BCN / DUP.MSG / ACK.REJ / OTHER MSG
3
Press the [DISP] key.
The cursor will move to the set value.
4
Turn the DIAL to select the set value.
OFF:
ALL 2 s - ALL 60 s:
ALL CNT:
BND 2 s - BND 60 s: Content is displayed in 2 alphabetic characters on the band
BND CNT:
"ALL" cannot be selected in MY MSG / DUP.BCN / DUP.MSG / ACK.REJ / OTHER
MSG.
5
Press the [BACK] key.
6
Repeat Step 2 to 5 to set the remaining items.
7
Press the PTT.
To exit the set mode and return to the operating screen.
Popup screen is not displayed.
Sets the display time of a popup for 2 to 60 seconds.
Popup continues to be displayed until a key is operated.
display section on the screen for 2 to 60 seconds. (See page
22).
Content is displayed in 2 alphabetic characters on the band
display section on the screen until a key is operated (See page
22).
21