DO NOT connect to structures or objects, other than the metal workbench which is supporting the workpiece. To do so may damage the safety system and will give a poor cut. DO NOT make the earth connection to the part of the workpiece that will be removed. Original Language Version PP35PLUS Issue: 2 - 15/05/12...
Page 4
The distance between the torch nozzle and workpiece is too great. b) You have completed a cut and have continued beyond the edge of a workpiece. fig.4 c) The waste falls away from the workpiece thus increasing the gap. Original Language Version PP35PLUS Issue: 2 - 15/05/12...
- A/V-A/V: Cutting current range and corresponding voltages. 9 - Serial number. Specifically identifies each machine. 10 - Rating of delayed action fuse for supply protection 11 - Symbols referring to safety. Original Language Version PP35PLUS Issue: 2 - 15/05/12...
Electrical and Electronic Equipment. When the product is no longer required, it must be disposed of in an environmentally protective way. Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.