How To Replace The Turntable Stylus (Needle) - auna multimedia 10000604 Manual

HOW to REPLACE the TURNTABLE STYLUS (NEEDLE)

To replace the turntable stylus (needle), please refer on the instructions below:
REMOVING the STYLUS from the CARTRIDGE
1. Place a screwdriver at the tip of the stylus and push downward as shown in direction "A".
2. Remove the stylus by pulling the stylus forward and pushing downward.
INSTALLING the STYLUS (NEEDLE)
1. Hold the tip of the stylus and insert the stylus by pressing as shown in direction "B".
2. Push the stylus upward as in direction „C" until the stylus locks into the tip position.
RECORD YOUR VINYL to PC in WINDOWS SYSTEM
1. Connect the USB cable to your turntable and your computer. No extra driver is required to drive
the USB.
2. Power and play your record by lifting the tone arm towards the platter.
3. Double click the Audacity program
4. Adjust the output and input volume.
and you will see this interface screen on your computer.
7