Charging - oneConcept TurboBuddy Manual

EN
14

CHARGING

Note: You may fix the charging base on wall or put on the flat surface.
• Put the appliance on the charging base.
• Insert the adaptor into the mains socket always make sure that the vacuum is turned
off before connecting to the power adaptor.
• The indicator light in red color will come on and keep flashing once the device has
made contact with the adaptor.
• In order to ensure that it is always ready for use, the device should be left on charge
with adaptor when not being used.
• The adaptor may become warm during charging-this is normal.
Indication Light
• When charging the appliance,The indication in red color will come on and keep
flashing.
• When fully charged.The indication light will keep on in red color.
• When using the appliance.The indication light will be in green color.
• When the battery is weak.The indication light in green color will keep flashing.