Table of Contents
Advertisement
CHECK IT FIRST BEFORE REPORTING A
BREAKDOWN.
If there is another trouble other than those described in the following table, pull out the power
plug and contact LG Electronics Service Center.
Symptoms
Power supply is okay
but it does not run.
No steam coming
out.
Although there is
water in water tank,
the "No W ater" lamp
is ON.
Humidity does not
rise or the water level
does not fall.
I smell an odor.
There is a leakage of
water.
Steam comes out of
other part than the
spray nozzle.
Are there alien mate-
rials accumulated in
the boiler, water
reservoir or the
steamer body?
• Dampening inside the Steamer is normal, not a trouble.
• Steam is actually invisible because it is composed of fine particles.
A smell can be produced from a plastic part.
- In the initial use, there can be a smell from a plastic part or so, and this is not a breakdown.
There can be some smell when the machine is started, first.
CHECK IT FIRST BEFORE REPORTING A BREAKDOWN.
Checkup points
• Is the power plug not pulled out?
• Is the "No Water" lamp not ON?
• Is the water tank mounted in
steamer body?
• Is the water tank not empty?
• Is the spray cover installed properly
in the steamer body?
• Is it so right after the water tank is
fixed?
• Is the steamer not tilted or on an
unstable surface?
• Is the room not too big?
• Is there ventilation in the room?
• Is the steamer inside or water
reservoir not contaminated?
• Is the water tank, inside of steamer
or water reservoir not left with
water remaining?
• Is the water tank cap closed tightly?
• Is there any crack on the packing of
the cap?
• Is the spray cover installed properly
in the steamer body?
• Is the water channel cover installed? • Drain the remaining water from the steamer
• Do you wash regularly the boiler,
water reservoir and the steamer
body?
• Do you use any other type of water
other than tap water?
Troubleshooting
• Put the power plug into the outlet.
• Fill the water tank with water and fix it.
• Fill the water tank with water and fix it.
• Fill the water tank up to at least half level.
• Install the spray cover properly in the
steamer body.
• After a minute, if the water tank is filled with
water, "No Water" lamp will be OFF.
• Discharge water remaining in the steamer
and place it on a level surface.
• Use the steamer in a proper environment (a
room size of 23m² or under).
• When using the steamer, close all windows
and doors.
• Clean the steamer's inside and water reser-
voir.
• Change the water in the tank with fresh tap
water, every day. Discharge the water re-
maining in the Steamer and water reservoir,
every day.
• Make sure the water tank cap is close
tightly before inserting it into the steamer
body.
• Change the Packing with a new one.
• Install the spray cover properly in the
steamer body.
and install the water channel cover.
• Wash them, more frequently.
• Make sure to use only tap water.
15
Advertisement
Table of Contents
