Items To Check Before Notifying Failure - LG LAHVSG40GD0 Owner's Manual

Items to Check before Notifying Failure

If you suspect defects on the product, check the following items before calling the service center for repair.
Symptom
Water in the water tank is
evaporated at slow rate or
not evaporated.
Humidity does not rise.
Indication of the current
humidity on the product is
different from indication on
other hygrometer.
The water tank is filled with
water; but Low Water Level
indicator lights.
Abnormal odor is
generated from the outlet.
Significant noise is
generated.
Owner's Manual
Checking
• Is the moisture disk correctly installed?
• Is the moisture disk seriously contaminated by
foreign substances?
• Is the water tank fi lled with water?
• Does it rain or is the indoor temperature kept low? • Humidity volume is kept low, and water in the
• Is the metal section of the water tank clogged
with foreign substances?
• Is the top body correctly seated?
• Is water in the water tank contaminated?
• Is the moisture disk contaminated?
• Is the odor smelled at initial operation of the product? • Then, the odor is not harmful to health. (The odor
• Do you use the product on a fl at surface?
• Is the any object interrupting operation of the
product in the vicinity of or on the product?
• Is the moisture disk correctly mounted?
• Is there foreign metal object or foreign substance
in the outlet?
Action
• Assemble the moisture disk in such a way
that the gears of the disk are aligned with the
assembling section of the body.
• Clean the moisture disk.
• Fill the water tank with water.
water tank is reduced at slow rate.
• Indication of humidity may vary dependent upon
position of the product even in a same space.
• Clean the water tank, and remove scale or
foreign materials from the metal section.
• Mount the top body at correct position.
• Clean the water tank and the moisture disk, and
then fi ll the tank with water again.
• Clean the moisture disk.
• Set Auto Drying function.
is same as in case when you purchase a new car.)
• Using the product on a slope may cause abnormal noise.
• Change place of the product, or remove object
interrupting fl ow of air.
• Inadequate disassembling/assembling of the
moisture disk may generate abnormal noise.
• Foreign materials in the outlet may cause
abnormal noise.
31