Advertisement
s
)
All manuals and user guides at all-guides.com
owner's manual
Control/Connector
LED Level Display
1
Power Indicator LED
2
Equalizer Controls
3
Volume Control
4
Fader Control
5
Line Channel Inputs
6
Power Connection
7
Front Channel Outputs RCA cables are used to connect the front
8
Rear Channel Outputs RCA cables are used to connect the rear
9
operation
preamp equalizer
Function
These rows of LEDs display the Preamp
Output Level. Left and right \ c hannels are
displayed independently at peak levels.
This LED is illuminated when the unit is
properly powered, grounded and the remote
power has been turned on.
This seven-band equalizer's rotary controls
give you control over musical frequency
ranges.
Allows adjustment of sound level for particular
program material or source.
• In a 2 Amplifier, 4 Speaker system, rotating
the knob to the FRONT side increases the
level of the front speakers; rotating to the
REAR side increase level of the rear speakers.
At mid position, both sets of speakers are at
maximum level
• In a 2 Speaker system, the fader control
should be rotated to the position which
provides highest levels for both sets of
speakers.
RCA cables are used to connect the front
input signal from head unit or other source.
Connect to power source as follows:
+12
: Connect a red wire of at least 12 gauge to
the car battery or other power source.
GROUND: Connect a black wire of at least 12 gauge
to car chassis for ground connection
REMOTE: Connect an orange wire to remote
12
activating (
V DC) wire of car stereo or other
head unit.
channel ouputs to the front channel amplifier
inputs.
channel ouputs to the rear channel amplifier
inputs.
5
Advertisement
