Advertisement
All manuals and user guides at all-guides.com
If you experience....
Signal Processor does not
turn on.
Level of sound is low.
Background noise is
too high.
precautions
Enjoy your system, but use it wisely and safely!
• Never drive with the volume raised so high you cannot hear what is occuring in traffic
around you.
• Be aware that repeated exposure to excessive volume levels can permanently damage
your hearing!
• Keep all electronics away from moisture, dust, extreme heat or extreme vibrations.
• Lanzar Audio products are capable of sound pressure levels in excess of 150 dB.
Continuous exposure to sound pressure levels over 100 dB may cause permanent
loss of hearing. Use common sense and PRACTICE SAFE SOUND.
owner's manual
Check that:
• Remote Turn-On wire has 12V
• 12V wire has 12V
• Ground wire is properly connected
• Wiring is not loose or cables
misconnected/disconnected
• RCA cables are not faulty.
• Wiring is not loose or cables
misconnected/disconnected
• RCA cables are not faulty.
troubleshooting
signal processors
20
Advertisement
