Advertisement
scale build up. In extreme hard water areas we highly recommend using
filtered water in your kettle to increase the life expectancy and help prevent
excessive lime scale build up.
• If the kettle switches off before it boils or has a white deposit building up
inside then it probably needs to be decalcified.
• Do not use vinegar but a commercially available descaling agent; carefully
follow the quantities recommended in the instructions of the agent:
1
Fill your kettle to the 'MAX'
mark on the body or the water
quantity recommended by the
descaling product.
2
3
Allow the kettle to boil, switch off and
then stand to allow the kettle to soak
for approximately 15 – 20 minutes, (if
necessary adjust the standing time to
the descaling products instructions).
4
Finally, empty the kettle and refill with fresh clean water and allow
to come to the boil and switch off once more, then again pour the
water away. Your Glass Kettle is now descaled and cleaned.
Add a citric based descaling agent
to the kettle according to the
descaling products instructions.
6
Advertisement
