Huawei HG633 Quick Start Manual page 2

When configuring the HG633 for the first time, use an Ethernet cable to connect the
HG633 to a computer.
2
Powering On
To power on the HG633, press its power button.
After the HG633 is powered on, the HG633 indicator turns on. The following table
lists how the indicators behave when the HG633 is operating correctly. If the
indicators do not behave as expected, ensure that everything is plugged in correctly.
Indicator
Power
DSL
Internet
Status
Green on
Red on
Off
Green on
Green
Blinking
Off
Green on
Green
Blinking
Red On
Red & Green
Blinking
Off
Description
The HG633 is powered on and finished booting.
Booting is failure after the HG633 powered on.
The HG633 is powered off or faulty.
The HG633 is activated through DSL.
The HG633 is being activated through DSL.
The DSL port is not activated successful.

The HG633 is powered off.

The Internet connection is successfully
established but no data is being transmitted.
The Internet connection is successfully
established and data is being transmitted.
The Internet connection is failure in PPP mode

(The user name and password for Broadband
dial-up is ineffective).
The Internet connection is failure in DHCP

mode.
A firmware update is in progress.
No connection is set up on the port.

The HG633 is powered off.

2