METRADO Gluceofine Operation Manual page 68

Testing Procedure
Step 2
• Place the top edge of the blood glucose test strip to the area you prepared
for testing.
• The blood will automatically be "drawn" into the blood glucose test strip
channel.
• Do not take off your finger until you hear a beep sound.
Correct
Completely filled
Incorrect
Poorly filled
• Gluceofine® blood glucose test meter only requires 0.5㎕ sample volume.
CAUTION
1. Make sure that the confirmation window is completely filled with blood!
2. If you have a poor amount of blood, please run a new test with a NEW test strip.
3. If you do not conduct the test within 3 minutes, the blood glucose test meter
will automatically power o to save battery life. In this case start a new test pro-
cedure.
68
Correct
Incorrect