Ringing Options; Station Name Programming; Step Calling; Icm & Co; Voice Over - LG-Nortel Aria-24IP User Manual

● ● ● ●
aria
DIGITAL KEY TELEPHONE SYSTEM USER'S GUIDE
–24IP

Ringing Options

Button
All Digital Keysets have 4 basic Station ringing options,
1 1, (1~4)
Additional tones for CO and ICM ringing are available for LDP-7000 series Keysets:
1 8 or 9,
(01~15)
LDP-7016D, 7024D & 724LD Keysets support an additional Melody (or Melody/ Full Duplex)
Unit, allowing further Ring Tone Options,
(Requires the optional Melody or Melody/ Full Duplex unit fitted.)

Station Name Programming

You can program your name and people using display phones will see your name instead of your station number, when you call.
Button
7 4
Press Trans/Pgm button.
Dial 7 4.
(name-alpha)
Enter your name. (to 12 letters using the alpha scheme in "Storing & using Speed Dial
Numbers"
Press Hold/Save button.
Step Calling; ICM & CO
When an extension is busy, you can make a call to a different station by dialing only the last digit of new station number.
Button
Dialing an extension number, and the station is busy.
After hearing ICM busy tone, dial the last digit of the next extension number in the same
10's group. (ex. If station "712" is busy, dial digit "4" to call station "714".)
It can be used for CO line call by pressing Speed key + last digit.

Voice Over

This feature provides voice announcement to a busy station without interrupting the existing conversation. The announcement
is received over the existing conversation so that only the busy station hears both incoming parties.
Button
When a busy Keyset receives a camp-on by another station, the Hold/Save key of busy Keyset
flashes.
After a tone, the busy Keyset can connect to both parties inbound speech path.
Press Hold/Save key in the busy Keyset to converse with new call, the 1ts caller receives MOH
Press Hold/Save key again to alternate & converse with original call.
If one caller hangs up, the other caller will be connected.
All manuals and user guides at all-guides.com
Procedures
Press Trans/Pgm button.
Dial 1 1
Select the ring type by dialing 1~4.
Press Hold/Save button.
Press Trans/Pgm 1 8 (dial 01 ~ 15) for ICM Ringing
Press Trans/Pgm 1 9 (dial 01 ~ 15) for CO Ringing
Press Hold/Save button
Press NAV Key (down) 1 2 2 (dial 01 ~ 15) for ICM Ringing
Press NAV Key (down) 1 2 4 (dial 01 ~ 15) for CO Ringing
Procedures
(pg 13.)
Procedures
Procedures
19
Range
Range
Range
Range