Advertisement
Description
The motor carrier, loadable up to a weight of 900 kg provides an ideal help for working on engines or
transmissions. A large variety of adjustments and adaption possibilities guarantee a high degree of
flexibility and security. While working turn the engine about 360° in order to get access even to those
areas that are difficult to reach. The four installation points can be easily adjusted with regard to angle
and distance and thus allow a universal adjustment for any engine. There are four steel rollers that en-
sure a safe position anf for an easy drivability of the entire construction.
Safety instructions / warnings
The owner and / or user must have read and understood the operating instructions of the device be-
fore using it. Installed personnel should be cautious, competent, trained and qualified in the safe han-
dling of the working equipment used when working on engines and their components. Warnings
should be read and understood.
1. Be familiar with the application control, the application process and the warnings.
2. The engine stand may only be used for the removal and installation of engine stand es.
(Gears, differential gears, etc.)
3. Ensure that all connectors are secure and secure.
4. Make sure you know the contents of the instructions for use.
5. his device is not intended to be used by persons (or even children) with reduced physical,
sensory or mental abilities or persons who do not have the appropriate experience or knowl-
edge, unless they are responsible for their safety Person or have previously been instructed
to use the equipment.
6. Children must be supervised to ensure that they do not play with the appliance.
7. Ensure that the load is free and no obstacles prevent / prevent the increase.
8. The engine stand may only be pushed slowly over level ground with load when fully lowered.
9. Ensure that the load can not slip or slip.
10. Check the loading balance after a few centimeters before proceeding further.
11. Avoid fluctuating the charge.
12. Ensure that no one is near the cargo.
13. Warn the present persons before lifting the charge.
14. Immediately report to your supervisor or workshop as soon as something unforeseen hap-
pens
15. Never lift more than maximum allowed
16. Never use damaged non-functioning engine stand .
17. Never use bent, damaged or worn load-bearing devices.
18. Never lift the load if an obstacle could interfere with the lift.
19. Stay concentrated and do not allow any distraction during the process.
20. Never use the load receptacle to lift, help or transport people.
21. NEVER SAVE LOADS ON PERSONS!
22. Unsecured loads can result in injuries to limbs or bones, including fatal injuries.
23. Avoid contact between the engine stand and other objects.
24. Never attempt to extend or repair the load receptacle
25. Do not use welding equipment near the support.
26. Always pay attention to the optimal lighting of the workplace.
27. Be sure to wear solid footwear.
28. Use a hairnet for long hair
29. Wear tight clothing.
30. Place jewelry (rings, earrings, watches, etc.)
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Version 5.2017
Seite 3
Advertisement
