Controls; Drive Safety Control Levers; Reverse Handle - CRT 5050-5050GS Operator's Manual

reverse handle
As a safety precaution, the drive control levers will
not lock in the forward position.
Cr To stop the wheels and tines at any time, release
the drive control levers.
IMPOIMTANT
As a safety precaution, the reverse handle will not
lock in reverse.
4. To stop the wheels and tines at any time, release
the reverse handle.
+ Do not operate both the reverse handle and drive
control levers at the same time.
SECTION CHECKLIST
Drive Safety Control Levers
Reverse Handle
A
CAUTION
This information is provided here only to introduce the
controls. DO NOT START THE ENGINE AT THIS TIME.
Starting and operating instructions are given on page
16. Please read this section and all operating and safety
instructions before starting your tiller.
A
CAUTION
ENGINE SHOULD BE OFF BEFORE ADJUSTING
ANY CONTROLS!
CONTROLS
REVERSE HANDLE
Engages wheels and tines in reverse.
Pulling reverse handle back towards operator reverses
tiller.
DRIVE CONTROL LEVERS
Engage wheels and tines into forward, releasing returns
machine to neutral.
Pulling down on drive control levers engages the wheels
and tines. Releasing drive control levers disengages the
wheels and brings the tiller to a complete stop.
A
CAUTION
Extreme caution should be used when operating
rototiller in the reverse direction.
10