Britax Steelcraft STROLL LITE LX5012 Series Manual page 12

Layback stroller
Hide thumbs Also See for Steelcraft STROLL LITE LX5012 Series:
Table of Contents

Advertisement

STROLLER OPERATION
SECURING YOUR CHILD HARNESS
WARNINGS:
ENSURE YOUR CHILD IS SECURED WITH A CORRECTLY ADJUSTED HARNESS.
THE ADJUSTED HARNESS SHOULD CLOSELY FIT THE CHILD.
NEVER LEAVE THE HARNESS BUCKLED WHEN NOT FITTED TO A CHILD IN THE
STROLLER, BECAUSE THE HARNESS CAN FORM LOOPS WHICH MAY POSE A
STRANGULATION HAZARD.
WHEN HARNESS IS NOT IN USE, DISCONNECT SHOULDER STRAPS FROM THE
WAIST STRAPS AND BUCKLE TO PREVENT STRANGULATION.
A five point harness is provided to restrain your child.
Buckle tongues separate for added safety.
To reconnect buckle tongues and to secure the child in the harness please
follow the steps below carefully.
PLEASE NOTE: Each waist buckle tongue has a raised rib on one side and can
only be locked into the buckle assembly with the raised rib facing up. Ensure the
harness straps are not twisted as they may become uncomfortable for the child.
Always apply the brakes before placing child in stroller seat. Position the
shoulder strap near the child's shoulder and position crotch strap between legs.
A
A
Position the shoulder strap tongue
(A) on top of the waist buckle
tongue (B) on both sides.
12
USE THE HARNESS AT ALL TIMES.
B
B
www.britax.com.au
Push both buckle tongues (A +
B) into the buckle housing (C)
until the buckle tongues lock into
position.

Advertisement

Table of Contents
loading

Table of Contents