Table of Contents
Advertisement
Motion Sensors
This test checks the movement of the fabric across
the sensors for the stitch regulation.
Needle Sensor Test
The Needle Sensor test will indicate whether the nee-
dle position sensor is functioning properly. Rotating the
hand wheel should result in a beep for a third of a stitch
cycle followed by no beep for the other two-thirds.
If you hear a constant beep or no beep at all for a full
360° rotation of the hand wheel, this indicates a failed
test and the machine should be inspected by a quali fied
Baby Lock repair technician.
34 |
www.BabyLock.com
Advertisement
Table of Contents
