Table of Contents
Advertisement
Replacing the palm-rest and keyboard assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
Place the palm-rest and keyboard assembly on a clean and flat surface.
Post-requisites
1. Replace the touchpad.
2. Replace the
system
board.
NOTE:
The system board can be removed and installed together with the heat sink attached, when replacing the
palm-rest assembly.
3. Replace the
display
assembly.
4. Replace the
wireless
card.
5. Replace the
power-adapter
6. Replace the speakers.
7. Replace the
I/O
board.
8. Replace the fan.
9. Replace the
hard
drive.
10. Replace the
solid-state drive/Intel Optane memory
44
Removing and installing components
computer. After working inside your computer, follow the instructions in
port.
module.
After
Advertisement
Table of Contents
