Symbol VC5090 Product Reference Manual page 156

7 - 12 VC5090 Vehicle Computer Product Reference Guide
Platform
Application
Config Block
Windows CE
Monitor
Splash Screen
Power Micro
Partition Table
Command File
System Reset
Auto Select
Initial Program Loader Menu
Figure 7-9
CAUTION
NOTE To scroll through the IPL menu, press the P1 button to scroll up, press the P3 button to scroll down and
press the P2 button to select.
NOTE If the platform or application partition sizes are changed, you must download a new partition table first. It
is recommended to download the Monitor partition last because the vehicle computer re-boots after
Monitor has finished downloading.
Scroll to select the partition to download or choose
7.
IPL Menu Partitions
Table 7-2
Partition Name
Platform
Application
Config Block
Windows CE
Monitor
Splash Screen
Initial Program Loader
To insure a successful download, do not remove power from the vehicle computer while in IPL mode.
Contains the files in the Platform folder.
Contains the files in the Application folder.
Contains information to correctly configure the Operating System for the mobile computer.
This information is loaded by the manufacturer.
Note: Great care should be taken to ensure that an incorrect config block is not loaded into
the mobile computer. Loading an incorrect config block prevents the correct operation of
the computer.
Contains the operating system for the vehicle computer.
Contains the Monitor and IPL programs.
Contains the splash screen that displays while booting the vehicle computer.
Note: Splash screens are generated from .bmp images and must be less than or equal to
240 pixels wide and 296 pixels deep. For mono displays, the bmp image must be 4 bpp
and for color screens the color depth must be 8 bpp. Note: 8 bits per pixel only applies to
splash screen images. Once Windows CE is running, the color density is 16 bits per pixel.
, then press .
Auto Select P2
Description