Advertisement
1
2
4
1
Tether Plate
2
LED Indicators
3
Scan Window
4
Scan Trigger
OPTIMUM UPRIGHT BODY POSTURE
Optimum Body Posture
for Low Scanning
SYMBOL DS3478
© 2007 MOTOROLA, INC. All rights reserved.
Motorola reserves the right to make changes to any product to improve reliability, function,
or design.
Motorola does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any
patent right or patent, covering or relating to any combination, system, apparatus, machine,
material, method, or process in which Motorola products might be used. An implied license
exists only for equipment, circuits, and subsystems contained in Motorola products.
MOTOROLA, the Stylized M Logo and Symbol and the Symbol logo are registered trademarks of
Motorola, Inc. Other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.symbol.com/warranty.
Patents
This product is covered by one or more patents. For patent information go to:
http://www.symbol.com/patents.
Service Information
If you have a problem using the equipment, contact your facility's Technical or Systems Support.
If there is a problem with the equipment, they will contact the Motorola Enterprise Mobility
Support at: http://www.symbol.com/contactsupport.
For the latest version of this guide go to: http://www.symbol.com/manuals.
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager to ensure that you are
adhering to your company's safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural/neutral position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Waste Electrical and Electronic Equipment (WEEE)
Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA
1-800-927-9626 http://www.symbol.com
MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the
U.S. Patent and Trademark Office. All other product or service names are the property
of their respective owners. © Motorola, Inc. 2007
72-72130-01 Rev B October 2007
SYMBOL DS3478
3
AVOID EXTREME WRIST ANGLES
OPTIMUM BODY POSTURE
ALTERNATE LEFT
AVOID BENDING
AND RIGHT KNEES
AVOID REACHING
REGULATORY INFORMATION
Regulatory Information
Symbol Technologies, Inc., the Enterprise Mobility business of Motorola, Inc. ("Motorola").
All Symbol devices are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required. Any changes or modifications to Symbol Technologies equipment, not
expressly approved by Symbol Technologies, could void the user's authority to operate the equipment.
Regulatory Information is available in French, Italian, German, Spanish (Spain), Portuguese, Japanese,
and simplified Chinese. Please see Web site:
http:// www.symbol.com/manuals and look for your specific product.
Country Approval
Regulatory markings are applied to the device signifying the radio (s) are approved for use in the
following countries: United States, Canada, Australia, Japan & Europe
Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is
available at http://www2.symbol.com/doc/.
1
: For 2.4GHz Products: Europe includes, Austria, Belgium, Czech Republic, Croatia, Cyprus,
Note
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic,
Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Radio Modules
The DS 3478 Scanners contain an approved radio module. This module is the Symbol Bluetooth radio
Type: 21-64381
Bluetooth Devices
This product is an approved Bluetooth device. BT ID: BT01784
Operation of the device without regulatory approval is illegal.
Power Supply
Use only a Symbol-approved power supply 50-14000-101 output rated 9 Vdc101 minimum 1 A. The
power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate
any approval given to this device and may be dangerous.
FCC / EU RF Exposure Guidelines
Safety Information
The device complies with Internationally recognised stadards covering Specific Absorption Rate (SAR)
related to human exposure to electromagnetic fields from radio devices.
Reducing RF Exposure – Use Properly
It is advisable to use the device only in the normal operating position.
Hand Held Devices:
To comply with FCC RF exposure requirements, this device must be operated in the hand. Other operating
configurations should be avoided.
Radio Frequency Interference Requirements
FOR HOME OR OFFICE USE
Radio Frequency Interference Requirements – Canada
Radio Transmitters
This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical
specifications were met.
Marking and European Economic Area (EEA)
Bluetooth for use through the EEA have the following restrictions:
• Maximum radiated transmit power of 10mW EIRP in the frequency range 2.400 -2.4835 GHz
• Italy requires a user license for outside usage.
Statement of Compliance
Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/EEC.
Declaration of Conformities may be obtained from http://www2.symbol.com/doc/
http://www.symbol.com/ds3478sf
OPTIMUM SCANNING POSITIONS
Aiming
ALTERNATE LEFT AND RIGHT HANDS
ALTERNATE LEFT AND RIGHT HANDS
TAKING BREAKS AND TASK ROTATION RECOMMENDED
TAKING BREAKS AND TASK ROTATION RECOMMENDED
AVOID EXTREME
WRIST ANGLES
1
.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
BEEPER INDICATIONS
Standard Use
Low-medium-high beep
Short high beep
4 long low beeps
Power up
Bar code decoded [if
Transmission error
decode beeper enabled]
detected; data is ignored
Short low-high beep
Short high-low beep
Scanner has paired with
Scanner has unpaired
the cradle
from the cradle
Parameter Menu Scanning
Short high-low-high-low beep
Short high-low beep
Successful parameter
Correct programming
setting
sequence performed
LED Indications
Standard Use
Off
Green
No power applied to
Bar code successfully
scanner, or scanner is
decoded
on and ready to scan
Charging Use
Green Slow Flash
Green Fast Flash
Red Flash
Scanner charging in
Scanner charging in rapid
Charging problem
slow mode (used
mode (used when cradle
See Product Reference
when cradle is
is powered from external
Guide for more
powered by host
power supply)
information
cable)
Optimum Body Posture for
Extended Range Scanning
Local Contact:
Recommended Usage Guide
Laser Labels
In accordance with Clause 5, IEC 825 and EN60825, the following
information is provided to the user:
ENGLISH
HEBREW
CLASS 1
CLASS 1 LASER PRODUCT
CLASS 2
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
DANISH / DANSK
ITALIAN / ITALIANO
KLASSE 1 KLASSE 1 LASERPRODUKT
CLASSE 1 PRODOTTO AL LASER DI CLASSE 1
KLASSE 2 LASERLYF
CLASSE 2 LUCE LASER
SE IKKE IND I STRÅLEN
NON FISSARE IL RAGGIOPRODOTTO
KLASSE 2 LASERPRODUKT
AL LASER DI CLASSE 2
DUTCH / NEDERLANDS
NORWEGIAN / NORSK
KLASSE 1 KLASSE-1 LASERPRODUKT
KLASSE 1 LASERPRODUKT, KLASSE 1
KLASSE 2 LASERLICHT
KLASSE 2 LASERLYS IKKE STIRR INN ILYSSTRÅLEN
NIET IN STRAAL STAREN
LASERPRODUKT, KLASSE 2
KLASSE-2 LASERPRODUKT
FINNISH / SUOMI
PORTUGUESE / PORTUGUÊS
LUOKKA 1 LUOKKA 1 LASERTUOTE
CLASSE 1 PRODUTO LASER DA CLASSE 1
LUOKKA 2 LASERVALO
CLASSE 2
LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO
ÄLÄ TUIJOTA SÄDETTÄ
PRODUTO LASER DA CLASSE 2
LUOKKA 2 LASERTUOTE
FRENCH / FRANÇAIS
SPANISH / ESPAÑOL
CLASSE 1 PRODUIT LASER DE CLASSE 1
CLASE 1
PRODUCTO LASER DE LA CLASE 1
CLASSE 2 LUMIERE LASER
CLASE 2
LUZ LASER
NE PAS REGARDER LE RAYON FIXEMENT
NO MIRE FIJAMENTE EL HAZ
PRODUIT LASER DE CLASSE 2
PRODUCTO LASER DE LA CLASE 2
GERMAN / DEUTCH
SWEDISH / SVENSKA
KLASSE 1 LASERPRODUKT DER KLASSE 1
KLASS 1
LASERPRODUKT KLASS 1
KLASSE 2 LASERSTRAHLEN
KLASS 2
LASERLJUS STIRRA INTE MOT STRÅLEN
NICHT DIREKT IN DEN LASERSTRAHL
LASERPRODUKT KLASS 2
SCHAUEN
CHINESE / 简体中文
LASERPRODUKT DER KLASSE 2
1 类
1 类激光产品
2 类
激光切勿注视光束
JAPANESE / 日本語
2 类激光产品
第1種
第1種レーザー製品
第2種
レーザー光線
光線を見つめないでください
2種 レーザー製品
Laser Devices
Symbol products using lasers comply with US 21CFR1040.10,
and IEC825-1:1993, EN60825-1:1994+A11:1996. The laser
classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their
intended purpose. The following statement is required to comply with US and
international regulations:
Caution: Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright
light source, such as the sun, the user should avoid staring directly into the light
beam. Momentary exposure to a Class 2 laser is not known to be harmful.
Scanner Labeling
Recommended Usage Guide
4 short high beeps
Low battery
indication
Long low-high beep
Unsuccessful pairing
attempt
Long low-high beep
Incorrect programming
sequence or Cancel
bar code scanned
Red
Data transmission
error or scanner malfunction
Red and Green Flash
Temperature fault
Advertisement
