Symbol MC50 User Manual page 52

2-22 MC50 User Guide
2. Select the Receive all incoming beams check box to receive beams. By default the mobile computer detects incoming
infrared (IR) beams and prompts you to accept them.
3. To disable detection of beams, deselect the Receive all incoming beams check box.
If an older mobile computer attempts to send an IR beam, the receiving mobile computer may not be prompted to accept
it. In this case, before the beam is sent from the older mobile computer, tap Receive an infrared beam at the bottom of the
Beam window.
Figure 2-22. Receiving Beam Data Acknowledgement
Figure 2-23. Beam Receive Window