Canon LBP228x Getting Started page 20

Appendix
Important Safety Instructions
This manual describes only warnings and cautions for the
installation and the power supply. Be sure to read
"Important Safety Instructions" described in the User's
Guide also.
WARNING
Indicates a warning concerning operations that may
lead to death or injury to persons if not performed
correctly. To use the machine safely, always pay
attention to these warnings.
CAUTION
Indicates a caution concerning operations that may
lead to injury to persons if not performed correctly.
To use the machine safely, always pay attention to
these cautions.
IMPORTANT
Indicates operational requirements and restrictions.
Be sure to read these items carefully to operate the
machine correctly and avoid damage to the machine
or property.
Installation
To use this machine safely and comfortably, carefully read
the following precautions and install the machine in an
appropriate location.
WARNING
Do not install in a location that may result in a fire or
electrical shock
•
A location where the ventilation slots are blocked (too
close to walls, beds, sofas, rugs, or similar objects)
•
A damp or dusty location
•
A location exposed to direct sunlight or outdoors
•
A location subject to high temperatures
•
A location exposed to open flames
•
Near alcohol, paint thinners or other flammable
substances
Other warnings
•
Do not connect unapproved cables to this machine.
Doing so may result in a fire or electrical shock.
•
Do not place necklaces and other metal objects or
En
containers filled with liquid on the machine. If foreign
substances come in contact with electrical parts inside
the machine, it may result in a fire or electrical shock.
•
If any foreign substance falls into this machine, unplug
the power plug from the AC power outlet and contact
your local authorized Canon dealer.
CAUTION
Do not install in the following locations
The machine may drop or fall, resulting in injury.
•
An unstable location
•
A location exposed to vibrations
Other cautions
•
When carrying this machine, follow the instructions in
this manual. If carried improperly, it may fall, resulting
in injury.
•
When installing this machine, be careful not to get
your hands caught between the machine and the
floor or walls. Doing so may result in injury.
Avoid poorly ventilated locations
This machine generates a slight amount of ozone and
other emissions during normal use. These emissions are
not harmful to health. However, they may be noticeable
during extended use or long production runs in poorly
ventilated rooms. To maintain a comfortable working
environment, it is recommended that the room where the
machine operates be appropriately ventilated. Also avoid
locations where people would be exposed to emissions
from the machine.
Power Supply
WARNING
•
Use only a power supply that meets the specified
voltage requirements. Failure to do so may result in a
fire or electrical shock.
• The machine must be connected to a socket-outlet
with grounding connection by the provided power
cord.
•
Do not use power cords other than the one provided, as this
may result in a fire or electrical shock.
•
The provided power cord is intended for use with this
machine. Do not connect the power cord to other
devices.
20
•
Do not modify, pull, forcibly bend, or perform any
other act that may damage the power cord. Do not
place heavy objects on the power cord. Damaging the
power cord may result in a fire or electrical shock.
•
Do not plug in or unplug the power plug with wet
hands, as this may result in an electrical shock.
•
Do not use extension cords or multi-plug power strips
with the machine. Doing so may result in a fire or
electrical shock.
•
Do not wrap the power cord or tie it in a knot, as this
may result in a fire or electrical shock.
• Insert the power plug completely into the AC power
outlet. Failure to do so may result in a fire or electrical
shock.
•
Remove the power plug completely from the AC
power outlet during a thunder storm. Failure to do so
may result in a fire, electrical shock, or damage to the
machine.
•
Make sure that the power supply for the machine is
safe, and has a steady voltage.
• Keep the power cord away from a heat source; failure
to do this may cause the power cord coating to melt,
resulting in a fire or electrical shock.
Avoid the following situations:
If excessive stress is applied to the connection part of the
power cord, it may damage the power cord or the wires
inside the machine may disconnect. This could result in a
fire.
•
Connecting and disconnecting the power cord
frequently.
•
Tripping over the power cord.
• The power cord is bent near the connection part, and
continuous stress is being applied to the power outlet
or the connection part.
•
Applying excessive force on the power plug.
CAUTION
Install this machine near the power outlet and leave
sufficient space around the power plug so that it can be
unplugged easily in an emergency.
Handling
CAUTION
Laser Safety
This product is confirmed as a Class 1 laser product in
IEC60825-1:2014 and EN60825-1:2014.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL À LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
The laser beam can be harmful to human bodies. Since
radiation emitted inside the product is completely
confined within protective housings and external covers,
the laser beam cannot escape from the machine during
any phase of user operation. Read the following remarks
and instructions for safety.
• Never open covers other than those instructed in the
manuals for this machine.
•
If the laser beam should escape and enter your eyes,
exposure may cause damage to your eyes.
•
Use of controls, adjustments, or performance of
procedures other than those specified in this manual
may result in hazardous radiation exposure.
Laser Safety Caution
Safety-Related Symbols
Power switch: "ON" position
Power switch: "OFF" position
Power switch: "STAND‐BY" position
Push‐push switch "ON" "OFF"
Protective earthing terminal
Dangerous voltage inside. Do not open covers other
than instructed.
CAUTION: Hot surface. Do not touch.
Class II equipment
Moving parts: Keep body parts away from moving
parts
CAUTION: An electrical shock may occur. Remove all
the power plugs from the power outlet.
There are sharp edges. Keep body parts away from
sharp edges.
[NOTE]
Some of symbols shown above may not be
affixed depending on the product.
Consumables
WARNING
Do not dispose of used toner cartridges in open
flames. Also, do not store toner cartridges or
paper in a location exposed to open flames. This
may cause the toner or paper to ignite, and result
in burns or fire.
Notice
Product Name
Safety regulations require the product's name to
be registered.
In some regions where this product is sold, the
following name(s) in parentheses ( ) may be
registered instead.
LBP228x / LBP226dw / LBP223dw (F176500)
EMC requirements of EC Directive
This equipment conforms with the essential EMC
requirements of EC Directive. We declare that this
product conforms with the EMC requirements of
EC Directive at nominal mains input 230 V, 50 Hz
although the rated input of the product is 220 to
240 V, 50/60 Hz. Use of shielded cable is necessary
to comply with the technical EMC requirements
of EC Directive.
EU WEEE and Battery Directives
You can see the WEEE and Battery Directives
information in the latest User's Guide (HTML
manual) from the Canon website (https://oip.
manual.canon).
Wireless LAN Regulatory Information
Regulatory information for users in Jordan
LBP228x / LBP226dw / LBP223dw includes
approved Wireless LAN Module (Model name:
AW-NM333).
Contains Wireless LAN Module approved by TRC/
SS/2018/181
Regulatory information for users in Russia
Подтверждение соответствия Минкомсвязи
России: Декларация соответствия №
Д-МДРД-5398 от 28.05.2018 года, действительна
до 28.05.2024 года, зарегистрирована в
Федеральном агентстве связи 07.06.2018
Regulatory information for users in UAE
LBP228x / LBP226dw / LBP223dw includes
approved Wireless LAN Module (Model name:
AW-NM333).
TRA
REGISTERED No: ER63428/18
DEALER No: DA0060877/11