Channel Set Up; Deleting (Or Adding) Channel - Sylvania 6309CE Owner's Manual

CHANNEL SET UP

You can program the tuner to scan all the channels
you receive in your area.
NOTE: Channel memory programming is NOT
needed when connected to a cable box or satellite
box. Just select the TV/VCR channel selector to the
output channel of the cable box or satellite box (Ex
CH3). Then select the channel to be viewed on the
Cable Box or Satellite Box.
Make sure ...
•
Press the POWER button to turn on the TV/VCR.
1
Select "CHANNEL SET UP"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "CHANNEL SET
UP".
Then, press the F.FWD/B button.
2
Begin auto ch programming
Press the PLAY/K or STOP/L but-
ton to point to "AUTO CH PRO-
GRAMMING".
Then, press the F.FWD/B button.
The tuner scans and memorizes all
the active channels in your area.
3
After scanning
The tuner stops on the lowest memorized channel.
•
When AUTO CH PROGRAMMING is activated
where there is no TV signal input, "NO TV SIG-
NALS" will appear on the display after the com-
pletion of the channel scanning.
•
The TV/VCR may recognize TV channels to be
CATV channels by the receiving conditions. In this
case, try auto ch programming again in the fine
receiving conditions.
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you
can add the deleted channel into the memory again.)
1
Press the MENU button on the
remote control. Then press the
PLAY/K or STOP/L button to
point to "CHANNEL SET UP".
Then, press the F.FWD/B button.
2
– M E N U –
Press the PLAY/K or STOP/L but-
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
ton to point to "ADD/DELETE
B CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH] CH".
ZERO RETURN
TIME SEARCH
Press the F.FWD/B button.
3
Press the PLAY/K or STOP/L but-
– CHANNEL SET UP –
ton until your desired channel num-
ADD / DELETE CH (CATV)
ber appears. (You can also use the
B AUTO CH PROGRAMMING
number buttons or the CHANNEL
K/L button to enter it.) (Example:
CH8)
4
Press the F.FWD/B or REW/s button. The channel
number changes to light red. The channel is deleted
from memory.
•
To delete another channel, repeat steps [3] and [4].
•
If you press the F.FWD/B or REW/s button
again, the channel is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
5
Press the MENU button on the remote control to
returns to TV mode.
NOTE: To confirm that channel(s) has been deleted
or added, press the CHANNEL K or L button.
- 14 -
DELETING (OR ADDING)
CHANNEL
Select "CHANNEL SET UP"
Select "ADD/DELETE CH"
Enter the desired channel number
Delete (or add) it from (into) memory
Exit the channel setup mode
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
B CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
– CHANNEL SET UP –
B ADD / DELETE CH (CATV)
AUTO CH PROGRAMMING
08
ADD / DELETE
EN
9J27