Connecting To An Amplifier/Receiver With A Dolby Digital Decoder; (For Dvd) - Sylvania SRTD420 Owner's Manual

CONNECTING TO AN AMPLIFIER/ RECEIVER WITH A
To use this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD can
outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up
to a receiver with Dolby Digital decoder, you can enjoy high-quality surround sound as enjoyed in movie the-
aters.
Use audio coaxial digital cables available at retail stores for the audio connections.
Center
speaker
Front speaker
(left)
Amplifier/ Amplifier/Receiv Amplifier/Receiver with Receiver with
Dolby Digital decoder Dolby Digital decoder Dolb y Digital decoder
Surround
speaker
(left)
NOTES:
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•
If connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the
setup mode. (See page 28 to set DOLBY DIGITAL to ON.)
•
Unless connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output
in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also
damage the speakers.
•
Only DVD audio is available using the digital audio out jack.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
DOLBY DIGITAL DECODER (for DVD)
Front speaker
(right)
er with
To COAXIAL DIGITAL
AUDIO INPUT jack
Surround
speaker
(right)
Subwoofer
– 12 –
ANT.
COAXIAL
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
[Fig. 7]
0C28
EN