Connecting To Front A/V Input Jacks; Connecting To An Amplifier/Receiver Equipped With Digital Input Jacks (Dvd, Cd, Mp3 Sound Only) - Sylvania SRTD420 Owner's Manual

CONNECTING TO FRONT A/V INPUT JACKS

When you watch a program recorded on an another
source (VCR, video camera or Video game system),
use the audio/video input jacks on the front of the
TV/DVD.
Connect the audio/video output
jacks of the source to the AUDIO
L/R and VIDEO jacks of this
TV/DVD. Then press SELECT until
"AUX" appears on the screen.
NOTE:
•
When you connect a monaural VCR (another
source) to this TV/DVD, connect the Audio output
jack of the monaural VCR (another source) to the
AUDIO L jack of this TV/DVD. The audio will
distributed in both L and R channel equally.
CONNECTING TO AN AMPLIFIER/RECEIVER EQUIPPED WITH
DIGITAL INPUT JACKS (DVD, CD, MP3 sound only)
Use an audio coaxial digital cable available at retail stores for the audio connections.
Amplifier/Receiver equipped with
digital input jacks.
NOTES:
•
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
•
Be sure to turn off the power to all components in the system before making connections.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
•
Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set-
tings may generate noise distortion, and may also damage the speakers. (See page 28 to set DOLBY
DIGITAL to OFF.)
•
This will only allow 2-channel DVD sound to be listened to on the amplifier.
AUX
To COAXIAL DIGITAL
AUDIO INPUT jack
– 11 –
To the
[Another source]
audio out-
put jacks
Audio/Video
cables
(not supplied)
etc.
To the video
output jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD, CD, MP3 AUDIO OUT)
[Front of the TV/DVD]
VIDEO L–AUDIO–R
[Fig. 5]
ANT.
COAXIAL
[Fig. 6]
EN
0C28