Motion controllers and akd servo drives (40 pages)
Summary of Contents for National Instruments PXI-665 Series
Page 1
NI PXI-665x Installation Guide This guide contains instructions for installing your NI PXI-665x controller and NI-Sync software. Installing the Software Be sure to install the driver software before installing the Note NI PXI-665x hardware. Complete the following steps to install the software: 1.
Page 2
Installing the Hardware The following are general installation instructions. Consult the chassis user manual or technical reference manual for specific instructions and warnings about installing new modules. 1. Power off and unplug the chassis. 2. Choose an available PXI slot in the PXI chassis. You must install the NI PXI-665x in Slot 2 when replacing Note PXI_CLK10 or when controlling PXI star triggers.
Page 4
National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corporation. Product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.