Table of Contents
Advertisement
TV/VCR SECTION
T
V OPERATION AND SETTINGS
WATCHING A TV PROGRAM
1
After antenna or cable connection is
completed, connect the power cord into
a standard AC outlet.
2
Press [POWER] to turn on the unit.
3
K
L
Use [CH.
/
] or the Number buttons to
select your desired channel number.
To use the number buttons
•Single digit channels: (Ex. 02, 03, 04 and so on)
Press [0] first to select a single digit channel.
•Two digit channels: (Ex. 12, 38, 95 ...)
Press two digits directly.
•Tree digit channels: (Ex. 115, 125 ...)
Press [+100] first, then press the last two digits.
4
X
Y
Use [VOL.
/
] to adjust the volume.
Press [MUTE] to instantly
mute the sound. Press it again
to restore the previous sound
level.
NOTE:
• Even if you turn off the unit in the DVD mode, the unit
will be in the TV/VCR mode when you turn it on again.
TO WATCH CABLE OR SATELLITE CHANNEL
If the unit is connected to a cable box or satellite
box, use [CH.
/
] to select CH3 or CH4 accord-
K
L
ing to the output channel setting of the device and
select desired channel on that device.
TO WATCH EXTERNAL INPUT
When an external equipment is
connected to the front AUDIO/
VIDEO input jacks, press
[SELECT] or [CH.
/
K
L
edly until "AUX" appears on the
screen.
NOTE:
• If there is no signal input from the antenna terminal
and no operation for 15 minutes, the unit will turn
itself off automatically.
TV/VCR
TV/VCR
VOLUME
20
C C C C C C
C C C C C C C C C C
] repeat-
AUX
SLEEP TIMER / PICTURE CONTROL
You can set Sleep Timer and picture
adjustment with [PICTURE / SLEEP].
• The menu changes as described below every time
you press [PICTURE / SLEEP].
Sleep Timer
BRIGHT
SHARPNESS
SLEEP TIMER SETTING
The Sleep Timer function is used to turn off the
unit without pressing [POWER] after a desired time.
1
Press [PICTURE / SLEEP] to
display the Sleep Timer menu.
2
Within 5 seconds, set your desired sleep time
using [s / B].
• [B]...Increase by 30 min. (Up to 120 min.)
• [s]...Decrease by 30 min.
NOTE:
• To cancel the Sleep Timer, use [CLEAR] or [s / B]
to set the time to "0".
3
To confirm the remainder time to shutdown,
press [PICTURE / SLEEP].
PICTURE CONTROL
1
Press [PICTURE / SLEEP]
repeatedly until desired control
is displayed.
2
Use [s / B] to adjust to your desired level within
5 seconds.
BRIGHT
to decrease brightness
CONTRAST
to decrease contrast
COLOR
to pale
TINT
to purple
SHARPNESS
to soft
• Even if any power failure occurs, the unit will
retain its memory for this feature.
TV/VCR
TV/VCR
CONTRAST
TINT
COLOR
SLEEP 0 MINUTE
BRIGHT
– P P P P P P P P P P P P P P C C P P P P P P P P P P P P P P +
to increase brightness
to increase contrast
to brilliant
to green
to clear
9
EN
Advertisement
Chapters
Table of Contents
