Sylvania  6719DF Owner's Manual
Sylvania  6719DF Owner's Manual

Sylvania 6719DF Owner's Manual

19 inch color tv/vcr/dvd triple combo
Hide thumbs Also See for Sylvania 6719DF:
Table of Contents

Advertisement

Quick Links

OWNER'S
MANUAL
COLOR TV/VCR/DVD TRIPLE COMBO
6719DF
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
(19 inch)
If you need additional operating assistance after reading this owner's
manual or to order replacement accessories, please call
TOLL FREE : 1-800-968-3429.
Or visit our WEB SITE at http://www.SylvaniaConsumerElectronics.com
Please read before using this equipment

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sylvania 6719DF and is the answer not in the manual?

Questions and answers

Summary of Contents for Sylvania Sylvania 6719DF

  • Page 1 OWNER’S MANUAL COLOR TV/VCR/DVD TRIPLE COMBO 6719DF (19 inch) INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional operating assistance after reading this owner’s manual or to order replacement accessories, please call TOLL FREE : 1-800-968-3429. Or visit our WEB SITE at http://www.SylvaniaConsumerElectronics.com Please read before using this equipment...
  • Page 2: C Important Safeguards

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT CAUTION DANGEROUS VOLTAGE RISK OF ELECTRIC SHOCK CONSTITUTING A RISK OF ELECTRIC DO NOT OPEN SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE CAUTION: TO REDUCE THE RISK OF ELECTRIC...
  • Page 3 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N W I R E GROUND C L A M P A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T...
  • Page 4: C Precautions

    PRECAUTIONS LASER SAFETY IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public perfor- This unit employs a laser. Only a qualified service mance and lending of discs are prohibited. person should remove the cover or attempt to ser- This product incorporates copyright protection tech- vice this device, due to possible eye injury.
  • Page 5: Location

    WARNING LOCATION Moisture condensation may occur inside the unit For safe operation and satisfactory performance of when it is moved from a cold place to a warm place your unit, keep the following in mind when selecting or after heating a cold room or under conditions of a place for its installation: high humidity.
  • Page 6: Table Of Contents

    TABLE OF CONTENTS C IMPORTANT SAFEGUARDS ..2 C SPECIAL PLAYBACK ..24 C SEARCH FUNCTION ...37 RENTAL PLAYBACK ..24 TRACK SEARCH .
  • Page 7: C Features

    FEATURES TV/VCR Mode • • Four Rotary 4-head Record/Playback System– Three different playback tape speeds : SP/LP/SLP heads ensure excellent picture quality and special • Two different recording tape speeds : SP/SLP effects playback. • Automatically cleans video Auto Head Cleaner– •...
  • Page 8: Dvd Mode

    DVD Mode ¡ ¡ Dolby Digital sound On-screen display This unit can handle Dolby Digital surround sound Information about the current operation can be dis- having 5.1 channels when connected to a Dolby played on a TV screen, allowing you to confirm the Digital decoder currently active functions (such as program play- ¡...
  • Page 9: Functions

    OPERATING CONTROLS AND FUNCTIONS - FRONT PANEL - [Fig.1] DVD buttons DVD buttons TV/VCR buttons TV/VCR buttons 12 13 STOP Button [TV/VCR P.23 / DVD P.35] - REMOTE CONTROL - [Fig. 2] (Front panel) Stops operation of the disc. (Remote control) Stops operation of the disc or tape contents.
  • Page 10 - REAR PANEL - [Fig.3] AUDIO OUT ANT. COAXIAL VIDEO input Jack CLEAR Button [DVD P.37] Connect to the video output jack of a video Hit to clear or cancel a setting currently entered. camera or VCR. MODE Button [DVD P.38] Hit to call up the program screen or the random AUDIO L/R input Jacks Connect to the audio output jacks of a video...
  • Page 11: Installing The Batteries

    ANT(ENNA). Jack AUDIO OUT COAXIAL Jack Connect to an antenna, cable system or satellite Connect to the digital input of an external system. amplifier or decoder (for DVD Audio only). Power cord Connect to a standard AC outlet (120V/60Hz). NOTE: •...
  • Page 12: C Preparation For Use

    PREPARATION FOR USE ANTENNA/CABLE CONNECTION Cables used here are commercially available. [ANTENNA CONNECTION] [CATV/SATELLITE CONNECTION] 75-ohm CATV Box or Coaxial Cable Satellite Box * VHF/UHF VHF/UHF Combiner From Cable System or AUDIO OUT ANT. COAXIAL Satellite Antenna 75-ohm Flat twin- ANT.
  • Page 13: Connecting To Front A/Vinput Jacks

    CONNECTING TO FRONT A/V INPUT JACKS When you watch a program recorded on another source (VCR or video camera), use the Audio/Video input jacks on the front of the unit. Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO jacks of this unit.
  • Page 14: Connecting To A Dolby Digital Decoder (For Dvd)

    CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGITAL Data stream from its AUDIO OUT COAXIAL jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters.
  • Page 15: Tv/Vcr Section

    TV/VCR SECTION TV OPERATION AND SETTINGS WATCHING A TV PROGRAM DEGAUSSING TV/VCR TV/VCR This television has a degaussing circuit that will clear up color errors on the TV screen that are caused by Plug in the unit power cord any excess magnetism which happens to get too close Plug the unit power cord into a standard to the TV.
  • Page 16: Sleep Timer

    • Playback of poorly recorded or worn VCR tapes. SLEEP TIMER • If the unit displays a black box on the TV screen, this means that TV/VCR the unit is set to the TEXT mode. The Sleep Timer function turns off the unit without To clear screen, select [CAP- using [POWER] after a desired period of time.
  • Page 17: Channel Set Up

    ADDING/DELETING CHANNELS CHANNEL SET UP The channels you no longer receive or seldom watch TV/VCR can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.) Make sure ... • The unit must be turned on. Select “CHANNEL SET UP”...
  • Page 18: Clock Set Up (Auto / Manual)

    CLOCK SET UP (AUTO / MANUAL) Select the year Press [K / L] until your desired – MANUAL CLOCK SET – year appears. TV/VCR MONTH DAY YEAR (Example: “2005”) 0 5 / 0 6 2 0 0 5 The unit clock must be set correctly so that VCR Then hit [B].
  • Page 19: Daylight-Saving Time

    AUTOMATIC CLOCK SETTING Make sure ... Enter the channel number that contains the • The unit must be turned on. Automatic Clock Setting Signal • Confirm the unit is receiving a RF (Radio Hit [RETURN] to go back to “SETTING CLOCK” Frequency) signal from either an antenna or cable menu.
  • Page 20: V-Chip Set Up

    NOTE: V-CHIP SET UP • When you select a rating and set it to [BLOCK], the higher ratings TV/VCR TV–Y [VIEW] will be blocked automatically. TV–Y7 ( [VIEW] B TV–G [BLOCK] TV–PG (DLSV) [BLOCK] This feature enables parents to prevent their children The lower ratings will be avail- TV–14 (DLSV) [BLOCK]...
  • Page 21: Mpaa Rating Set Up

    MENU LANGUAGE MPAA RATING SET UP TV/VCR Follow steps 1 to 3 in the “V-CHIP SET UP” section on page 20. Select “LANGUAGE” Select your desired item - TV/VCR SETUP - TIMER PROGRAMMING Hit [SETUP]. Press [K / L] to point to your SETTING CLOCK [VIEW] CHANNEL SET UP...
  • Page 22: Video Cassette

    VIDEO CASSETTE This unit will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS INSERTING A CASSETTE • Avoid moisture. Moisture condensation may occur Insert the cassette in the direction as shown.
  • Page 23: C Playback

    PLAYBACK NORMAL PLAYBACK SLOW MOTION TV/VCR TV/VCR Hit [PAUSE F], then hit [D] to start the playback Make sure ... in slow motion. The unit mutes the sound during • The unit must be turned on. slow motion. Hit [PLAY O] to return to normal playback.
  • Page 24: C Special Playback

    SPECIAL PLAYBACK Make sure ... AUTO REPEAT PLAYBACK • The unit must be turned on. • Insert a prerecorded tape. TV/VCR The unit has the auto repeat function that allows you to RENTAL PLAYBACK repeat a tape indefinitely without hitting [PLAY O]. Repeat playback from the beginning ALL REPEAT: TV/VCR...
  • Page 25: C Search

    SEARCH Make sure ... NOTE: • • Tapes recorded in the SP or LP mode will normally The unit must be turned on. display a noise bar on the TV screen and the pic- • Insert a tape. ture may revert to Black and White. ZERO RETURN Return to normal speed Hit [PLAY O].
  • Page 26: Index Search

    INDEX SEARCH Select “INDEX SEARCH” - TV/VCR SETUP - TIMER PROGRAMMING SETTING CLOCK Hit [SETUP]. CHANNEL SET UP TV/VCR USER’S SET UP V-CHIP SET UP Press [K / L] to point to “INDEX LANGUAGE [ENGLISH] CAPTION [OFF] This feature provides a method of indexing the start- SEARCH”, then hit [ENTER].
  • Page 27: C Special Features

    SPECIAL FEATURES REAL TIME TAPE COUNTER AUTO REWIND-EJECT TV/VCR TV/VCR • When the end of a tape is reached during record- This shows the elapsed recording or playback time in ing, playback, or fast-forward, the tape will auto- hours, minutes, and seconds. (The displayed time will matically rewind to the beginning.
  • Page 28: C Recording

    RECORDING Make sure ... • The unit must be turned on. • Insert a cassette tape with its erase-prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: •...
  • Page 29: Otr (One Touch Recording)

    Time(s) Display Recording length OTR (One Touch Recording) 1 time (normal recording) 2 times 0:30 30 minutes TV/VCR 3 times 1:00 60 minutes This function enables you to set a recording length simply by hitting [REC/OTR] on the unit. 17 times 8:00 480 minutes Make sure ...
  • Page 30: C Timer Recording

    TIMER RECORDING AUTOMATIC TIMER Select “TIMER PROGRAMMING” RECORDING Hit [SETUP]. - TV/VCR SETUP - B TIMER PROGRAMMING SETTING CLOCK Confirm “TIMER PROGRAM- CHANNEL SET UP TV/VCR USER’S SET UP V-CHIP SET UP MING” is pointed by hitting [K], LANGUAGE [ENGLISH] CAPTION [OFF] You may set the unit to start and end a recording then hit [ENTER].
  • Page 31: Timer Program Extension

    NOTES: Set beginning hour • The display will not be turned on automatically at – TIMER PROGRAMMING – Press [K / L] until the desired hour CH DATE BEGIN END the time the programmed recording begins. To -/- - - - - -:- - -:- - - - appears.
  • Page 32: Auto Return

    TO CONFIRM THE TIMER SETTING AUTO RETURN 1)Hit [POWER] so that the Recording indicator light goes off. TV/VCR 2)Hit [SETUP]. With this feature, after timer recording is finished, 3)Confirm “TIMER PROGRAMMING” is selected. the beginning of the recorded program(s) can be 4)Hit [ENTER].
  • Page 33: C On Screen Display

    ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, hit [DISPLAY]. Each time you hit [DIS- PLAY], the TV screen will change as follows: When the Closed Caption mode is OFF: When the Closed Caption mode is ON: •...
  • Page 34: Dvd Section

    DVD SECTION ABOUT THE DISCS PLAYABLE DISCS Recorded Playable Disc size Region code Disc types Mark (logo) signals discs DVD-Video * 1,2,3,10 Example 12 cm Title 1 Title 2 Digital video DVD-RW Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 DVD-R (MPEG2)
  • Page 35: C Playing A Disc

    PLAYING A DISC BASIC PLAYBACK GENERAL FEATURES DVD-V DVD-V Getting started DVD may contain menus to navigate the disc and access special features. Press the appropriate ¡ Turn on the power of amplifier and any other com- Number buttons or [ / s / B] to highlight your ponents, if necessary.
  • Page 36: Resume

    SLOW FORWARD / RESUME SLOW REVERSE DVD-V DVD-V During playback, hit [STOP C]. During playback, hit [PAUSE F]. ¡ Resume message will appear on the TV screen. Press and hold [ ] or [ ] for a few Hit [PLAY O], playback will resume from the seconds.
  • Page 37: C Search Function

    SEARCH FUNCTION TRACK SEARCH TIME SEARCH DVD-V There are three ways to begin playback on an Audio During playback, hit [SEARCH MODE] three CD at a specific track. times (CD: twice) to display the Time Search Using the Number buttons on the TV screen.
  • Page 38: C Special Playback Function

    SPECIAL PLAYBACK FUNCTION REPEAT PROGRAM REPEAT is available only during playback. REPEAT TITLE / CHAPTER You may determine the order in which tracks will play. DVD-V In the stop mode, hit [MODE]. ¡ The “PROGRAM” screen will appear. To activate the repeat function, hit [REPEAT] during playback.
  • Page 39: C Changing The Settings

    CHANGING THE SETTINGS SUBTITLE LANGUAGE AUDIO LANGUAGE DVD-V DVD-V The unit allows you to select a language during DVD The unit allows you to select a language for subtitles disc (if multi languages are available) playback. during DVD disc (if available) playback. Hit [AUDIO] during playback.
  • Page 40: Camera Angle

    CAMERA ANGLE VIRTUAL SURROUND DVD-V DVD-V Some DVD discs contain scenes which have been shot You can enjoy surround-sound effect over two speak- simultaneously from various angles. You can change ers on this unit. the camera angle when the “ ”...
  • Page 41: C The On-Screen Information

    THE ON-SCREEN INFORMATION DVD-V You can check the information about the current disc by hitting [DISPLAY]. For DVD-Vs For Audio CDs Hit [DISPLAY] during playback to show cur- Hit [DISPLAY] during playback to show the rent Chapter. current Track. ¡ ¡...
  • Page 42: Items

    CHANGING THE DVD SET UP ITEMS Language Code Language Code CUSTOM MENU Abkhazian 4748 Laothian 5861 Afar 4747 Latin 5847 DVD-V Afrikaans 4752 Latvian;Lettish 5868 Albanian 6563 Lingala 5860 You can change the DVD player’s settings. Amharic 4759 Lithuanian 5866 Arabic 4764 Macedonian...
  • Page 43: Display Setting

    DISPLAY SETTING AUDIO SETTINGS Choose the appropriate Audio settings for your equip- Follow steps 1 to 2 in the “CUSTOM MENU” sec- ment as it only affects during the playback of DVD tion on page 43. discs. Press [ ] to select the below items then Follow steps 1 to 2 in the “CUSTOM MENU”...
  • Page 44: Parental Control

    PARENTAL CONTROL IF YOU FORGET THE PASSWORD Parental Control limits the disc viewing that exceed Hit the Number buttons [4], [7], [3], [7] at your setting (with a password or playback will stop). step 3 . Then enter your new password. This feature allows you to prevent discs with alterna- ¡...
  • Page 45: Troubleshooting Guide

    TROUBLESHOOTING GUIDE If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, con- sulting the following checklist. PROBLEM CORRECTIVE ACTION • No power Make sure the power plug is connected to an AC outlet. •...
  • Page 46 PROBLEM CORRECTIVE ACTION • Picture OK, Sound Poor Try a new channel, if OK, then possible station trouble. • Check for local interference. • Timer recording is not possible Make sure the timer recording is set correctly. • Make sure the power is off. •...
  • Page 47 DVD Mode PROBLEM CORRECTIVE ACTION No picture • Insert a correct video disc that plays on this unit. • Hit [SELECT] to select DVD mode, then try other DVD feature. • Insert the disc. Disc cannot be played • Clean the disc. •...
  • Page 48: C Maintenance

    MAINTENANCE CABINET CLEANING 1. Please visit your local Audio/Video store and pur- chase a good quality VHS Video Head Cleaner. • Wipe the front panel and other exterior surfaces of 2. If a Video Head Cleaner does not solve the prob- the unit with a soft cloth immersed in lukewarm lem, please call our help line mentioned on the water and wrung dry.
  • Page 49: Specifications

    SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Sound output: 2 speakers, 1W, 8 ohm TV/VCR 19 inch in-line gun, OTHER SPECIFICATIONS 90˚ deflection tube Terminals Television system : NTSC-M Antenna input: VHF/UHF/CATV Closed caption system :§15.119/FCC 75 ohm unbalanced (F-type) Video Heads : Rotary four-head Video input: RCA connector...
  • Page 50: C Español

    INDICE 13. Botón REC/OTR (Panel frontal) Presione para empezar la grabación manual. Presione ■ INDICE ........50 repetidamente para empezar la grabación instantánea (OTR).
  • Page 51 PREPARACIÓN PARA LA 32. Botón SEARCH MODE Presione para localizar un punto deseado. UTILIZACIÓN 33. Botón AUDIO Modo DVD: CONEXIONES DE ANTENA/CABLE Presione para seleccionar un modo de sonido o idioma de audio deseado. Consulte la figura 4 de la página 12 34.
  • Page 52 CONEXIÓN A TOMAS DE CONEXIÓN A UN DECODIFICADOR ENTRADA DELANTERAS DOLBY DIGITAL (para DVD) Cuando vea un programa grabado en otra fuente Si utiliza esta unidad para reproducir un disco DVD (videograbadora o videocámara), utilice las tomas de grabado en formato de sonido envolvente Dolby entrada AUDIO/VIDEO de la parte delantera de la Digital de 5,1 canales, la unidad emitirá...
  • Page 53: Idioma Del Men

    IDIOMA DEL MENÚ SECCIÓN DE TV/VCR TV/VCR FUNCIONES Y AJUSTES Seleccione “LANGUAGE” DE TV Presione [SETUP]. Presione [K / L] para apuntar al “LANGUAGE”. PARA MIRAR UN PROGRAMA DE TV TV/VCR Seleccione “ENGLISH”, “ESPAÑOL” o “FRANÇAIS” Enchufe el cable eléctrico Presione [ENTER] repetidamente para seleccionar Enchufe el cable eléctrico de la unidad en un “ENGLISH”...
  • Page 54 GRABACIÓN Seleccione el año Presione [K / L] hasta que aparezca el año deseado. GRABACIÓN NORMAL (Ejemplo: “2005”) Presione [B]. TV/VCR SOLO puede ver el mismo programa que se está grabando. Seleccione la hora Presione [K / L] hasta que aparezca la hora deseada. (Ejemplo: “5”, “PM”) Seleccione el canal a grabar Presione [B].
  • Page 55 REANUDACIÓN SECCIÓN DE DVD DVD-V REPRODUCCIÓN BÁSICA Durante la reproducción, presione DVD-V [STOP C]. ¡ Aparecerá el mensaje de continuación en la pantalla de TV. Para empezar ¡ Conecte la alimentación del amplificador y otros Presione [PLAY O], la reproducción continuará componentes, si es necesario.
  • Page 56: C Warranty

    LIMITED WARRANTY FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.

Table of Contents