Connecting To An External Device (Front); Installing The Batteries In Remote Control - Sylvania 6513DG Owner's Manual

CONNECTING TO AN EXTERNAL DEVICE (FRONT)

When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks of
this unit.
Then use [SELECT] or [CH. K K / L L ] until "AUX" appears on the screen.
ex.
VCR or video camera, etc.

INSTALLING THE BATTERIES IN REMOTE CONTROL

1) Open the battery compartment cover by pressing
the cover on the remote unit in the direction of
the arrow.
2) Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.
1 2
To the Audio output jack
Audio Cable
(OUT)
(commercially available)
To the Video output jack
Video Cable
(OUT)
(commercially available)
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicat-
• Do not mix different types of batteries together
• If the device is not to be used for a long period
3
• Do not try to recharge batteries not intended to
OPEN / CLOSE
VIDEO AUDIO
(IN)
ed in the battery compartment. Reversed batter-
ies may cause damage to the device.
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
of time, remove the batteries to prevent damage
or injury from possible battery leakage.
be recharged; they can overheat and rupture.
AUX
[Front of the unit]
(IN)
HEADPHONE
EN
7