Preparation For Use; Antenna/Cable Connections - Sylvania 6513DG Owner's Manual

P
REPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

Plug the incoming cable into the ANT. jack on the rear of the unit.
If your cable service supplies you with a converter box or if you use a satellite system, connect the box with
this unit as shown below.
Cable
or
TV signal
OR
Incoming cable from Cable Company
or Satellite Antenna
NOTE:
Before plugging the antenna into
the ANT. jack of the unit, check
that the pin is not bent. If it is bent,
straighten the pin as illustrated,
then plug the pin into the ANT. jack
of the unit.
6
EN
Antenna
Incoming cable from home
Antenna / Cable Company
(No Cable Box)
Cable Box or Satellite Box*
Bent pin
Cable
Plug
(Needs to be
straightened)
ANT.
ANT.
*NOTE
(DO NOT DISCONNECT FROM BOX)
Some cable TV systems use scrambled
signals and require a special converter to
receive these channels. Consult your local
cable company.
For your safety and to
avoid damages to the unit,
unplug the antenna cable
from the ANT. jack before
(Straight pin)
moving the unit.
Rear of the unit