C Preparation For Use; Antenna/Cable Connections - Sylvania 19 Inch SSC719C Owner's Manual

46.
ANT. in jack
Connect to an antenna, cable system, or satellite
system.
47.
Power cord
Connect to a standard AC outlet (120V/60Hz).
Remove the power cord from the hook to
NOTE:
avoid breaking a wire before you connect
to a standard AC outlet.
Satellite Box or
Cable Box (Not supplied)
O UT
75-ohm
From Cable Coaxial
System Cable
(Not sup-
plied)
75-ohm Coaxial
Cable (Not
supplied)
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor
antenna.
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects
directly to your TV/DVD/VHS without a converter
box.
By using this connection you can:
1) Use the TV/DVD/VHS remote to select channels.
2) Program one or more unscrambled channels for
Automatic Timer Recording.
NOTE: This unit will ONLY record and view the
same channel.
PREPARATION FOR USE
ANTENNA/CABLE CONNECTION
From Cable System or
IN
Satellite Dish
ANT. 1
ANT.
or
48.
COAXIAL digital audio out jack
Connect to the digital input of an external
amplifier or decoder.
49.
AUDIO L/R output jack
Connect to the analog audio input of an external
amplifier or decoder.
or
VHF/UHF
L
AUDIO OUT
R
COAXIAL
Combiner
(Not supplied)
or
CABLE WITH CONVERTER/
DESCRAMBLER BOX OR SATELLITE
BOX
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown in the ilustration.
By using this connection you can also record scram-
bled channels. However, channel selection must be
made with the converter box or satellite box. This
means that channels cannot be changed using the
TV/DVD/VHS Remote Control. Unattended timer
recording is limited to one channel at a time.
- 11 -
VHF/UHF Antenna
(Not supplied)
VHF Antenna (Not supplied)
UHF Antenna
(Not supplied)
[Fig. 4]
Flat twin-lead cable

Antenna/Cable Connections

Continued on the Next Page.
EN
1C29