Sleep Mode; Ptc Heater Mode; Auto Restart Function; Automatic Defrost - Honeywell TP30 User Manual

USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)

SLEEP MODE

The LED display brightness will be reduced when the unit is in Sleep Mode. Press the
the Sleep Mode. When Sleep Mode is activated the
is a one-minute window period in which you can adjust the settings such as humidity and fan speed.
After one minute has lapsed, the top display will shut off, except the
button to deactivate Sleep Mode.
#

PTC HEATER MODE

Press the to activate PTC Heater Mode, the
function is suitable for environments with a temperature of 0°F to 41°F (0°C to 5°C). This
technology helps to add heat to the dehumidifying process which helps to improve the
efficiency, and increases the dehumidifying capacity of the unit.
#
THIS IS ONLY FOR MODEL TP50H WITH PTC TECHNOLOGY
AUTO DRAIN PUMP MODE*
The Auto Drain Pump function helps to remove condensation vertically and horizontally. Press the
to activate the Pump function, the
*THIS IS ONLY FOR MODEL TP70P WITH BUILT-IN DRAIN PUMP

AUTO RESTART FUNCTION

This unit is equipped with an Auto Restart feature. When there is a power outage, the dehumidifier
will automatically resume all its previous settings upon regaining power.

AUTOMATIC DEFROST

Frost may build up on the internal coils of the unit. When there is frost build up, the internal
compressor will turn off and the fan will continue to run until the frost has melted. Once the internal
coils have defrosted and dried, the compressor or fan will automatically restart and dehumidifying
will resume.
indicator light will be illuminated. There
indicator light is illuminated. The PTC Heater
indicator light will be illuminated.
EN 11
to activate
indicator light. Press any