Equipment Description; Technical Data - Mannesmann 01795 Operating Instructions Manual

Compact air compressor

Hide thumbs

Table Of Contents

Table of Contents

Available languages



Check your compressor for damage. Carefully check all parts for their impeccable and intended function

before using the compressor. All parts must be correctly mounted in order to ensure the safety of the

device. Damaged parts must be professionally repaired or replaced by a service workshop unless otherwise

stated in the operating instructions. Damaged switches must be replaced by a service workshop. Only use

the compressor if the switch can be switched on and off.



Repair work may only be carried out by electricians. Repair work must be carried out by electricians.

Otherwise the operator will have the risk of accidents.



Replacement of power supply cords. Damaged power supply cords must be replaced by the

manufacturer or an electrician in order to avoid hazards.

Safety instructions when working with blow-out guns and spraying guns.



Compressor and lines may reach high temperatures during operation. Danger of burns!



When disconnecting hose couplings, you must keep the coupling element of the hose in your hand in

order to avoid injury caused by the uncontrolled hose.



Wear goggles when working with a blow-out gun. Danger of injury caused by blown-off flying parts!



Do not direct blow-out guns and similar tools to your own body or the bodies of other persons.



Do not process paint or solvents with a flash point of below 55° C.



Wear appropriate face masks when processing harmful liquids. Make sure to observe the instructions

regarding required protective measures made by the manufacturers of such liquids.



Do not smoke in the workshop and during the spraying process. Paint fumes are highly combustible.



Fire and open light are forbidden.



Provide adequate ventilation in the workshop.

These safety instructions must be kept at a safe place.