Connection To An External Unit; Maintenance - Sylvania SCD152 Operating Instructions Manual

CONNECTION TO AN
EXTERNAL UNIT
Use a commercially available connection cord which
has a 3.5mm stereo plug at one
plugs at the other end.
Connect the stereo plug to the LINE OUT jack
of the unit and connect the phono plugs to the analog
input (AUX) terminals of the external unit.
NOTE
Turn off the power of both units before connection.
DO NOT connect to the PHONO(magnetic pickup)
inputs of an amplifier.
Volume and bass boost on this unit have no effect
on the line output.
I
LINE OUT

MAINTENANCE

I To clean the lens
If the lens become dirty, the player will skip or not
play, If this occurs, clean the lens in the following.
end and two phono
manner, To remove dust or dust particles, first use a
camera lens blower/brush 1 to blow a few times to
loosen particles, then gently brush the lens
finish by blowing the lens again.
Note
Take care not to get too much solution on the swab.
which could flow into the unit and cause damage.
Pressing too strongly with the swab could scratch
or break the lens.
To clean the discs
Before playing, wipe the disc from the center out
with a cleaning cloth, After playing, store the disc
in its case.
LINE IN
CD IN
AUX
J
K
J
1
K
clean
2