Before Playback - Sylvania SCD152 Operating Instructions Manual

BEFORE PLAYBACK

HOLD switch D
Release the switch to
HOLD
When not using the unit, set the HOLD switch to the
ON position, Accidentally pressed button will not
function. If buttons are pressed when the HOLD
switch is set to the ON position. "HOLD" will light on
the display.
Turning on and off D
Turning the power on
Press PLAY/PAUSE. Power is turned on and
playback starts.
Turning off the power
If no new operations are done within
from the end of last operation, the power is turned
off automatically. (Auto power off function) you can
turn off the power before it is automatically turned
off by pressing STOP
D
Standby mode
When an operation finishes, the unit goes into standby
mode until the auto power off function automatically
turns off the power.
To enter standby mode, press
start playback, then press
Adjusting the sound
E
Volume
Turn the VOLUME control to adjust the volume.
E
X-BASS
Switch on the X-BASS for extra bass emphasized.
F
Inserting a disc
1. Push the OPEN switch to open the disc compartment
2. Place a disc in the center with the label side facing up.
3. Close the disc compartment.
To remove the disc G
Pick up the disc, holding its edge, while pressing
the pivot gently.
position before playback.
OFF
30 seconds
PLAY/PAUSE to
STOP
D
E
F
G
BASS