Pyle PSCNPPH User Manual page 9

3. Insert the Slide/Negative Holder into the slot on the right of the device or insert
photo tray into photo tray slot from the top of the device.
4. Apply the power to the lm & photo scanner by two ways:
1. USB: Connect the lm & photo scanner to PC with USB cable
2. 5V Adapter: Connect the adapter to the device with USB cable
5. Press POWER button to turn on the lm & photo scanner.
Note:
1. When the Film scanner mode is selected, the Film scan indication LED is on.
2. When the Photo scanner mode is selected, the Photo scan indication LED is on.
6. Follow the menu on screen for scanning.
7. After the scanning is done, take out the memory card.
Note: The lm & photo scanner has a built-in memory for recording, if there
is a memory card inserted, it will be the top priority for saving data
8. View pictures from PC by USB mode
9. When capturing in either photo or film modes, please remember to push both
slide switches to the correct placement. A noti cation will appear on-screen as a
reminder to carry out the following:
1. Photo: Push both sliders to the right
1. Push the slider above to the right ( photo scanning)
2. Please remove lm tray for photo scanning
2. Film: Push both sliders to the left.
Push the slider above to the left ( lm scanning)
Operation Guide
Home/MODE: Main menu
When the Film scanner mode is selected, the following main menu will appear:
1. Language Mode
2. USB Mode
3. Capture Mode
4. Playback Mode
5. Film Type
6. Resolution
9
www.PyleUSA.com