Time Setting; Display; Special Features; Coin Register (Option „A") - NZR ZMZ 0215 Manual

2.2 time setting

To set the running time, the imprinted values of Dip-switches set to „on" position has to
be added.
E.G. Upper-Dip-switch
switch 1, 3 and 4 set to „on"
The result of addition of imprinted values is 13
In addiction of basic setting, the running time is set to 13 minutes or 13 seconds.
Lower-Dip-switch
switch 2 and 5 set to „on"
The result of addition of imprinted values is 18
In addition with the values of the upper-Dip-switch the total running time is 18 minutes
and 13 seconds or 18 hours and 13 minutes.

2.3 Display

After insertion of first coin a „1" is displayed. After insertion of a second coin (if activated)
a „2" is displayed. The display will jump back to „1" if the time stock of second coin is used
up. When time stock reaches the last 9 minutes the remaining time flashes on display in
one minute steps. If the running time per coin is set to a lower value than 9 minutes, this
time will flash on display.
3. Special features ZMZ 0205
3.1 Coin register (Option „A")
When ordering „Option A" a mechanical 5-/6-digit non-resetable roller counter is moun-
ted on the cover for registration of all inserted coins. This option is retrofittable by factory
easily.
NZR – Ihr Partner für Energiemessung
14