Translation Of The Original Operating Instructions - Wolfcraft 2200.000 Translation Of The Original Operating Instructions

INTRODUCTION
• CAUTION! Read all the safety information and instructions that were supplied with the power drill pump.
Failure to comply with safety information and instructions can lead to injury.
• Keep the manual in a safe place for future reference.
INTENDED USE
The power drill pump is suitable for emptying containers such as garden ponds, rain barrels, Jacuzzis, faulty washing
machines or similar. The power drill pump is an attachment designed exclusively for power drills with an output of at least
600 Watts. The power drill used must comply with the standard DIN EN 60745. The power drill pump has two connections
for commercially available hoses. To prevent twisting, the power drill pump must be mounted on a suitable wooden board
with the mounting materials included in the scope of delivery. The power drill pump is self-priming and may not be allowed
to run dry for more than 30 seconds. For this reason, ensure that the pump is regularly lubricated. The power drill pump has
a maximum pump output of 3000 litres per hour (depending on hose diameter).
SYMBOLS AND MEANINGS
Warning of general
danger
Read instructions /
information!
Wear safety goggles.
Wear a protective mask.
Max. pump lift
Art. no.
2200.000
2202.000
2207.000
WORKING INSTRUCTIONS
• The power drill pump has a maximum suction head of 3 metres and a maximum pump lift depending on the hose diameter
(see table above).
• The free hose length on the suction side must be at least 1 metre to the material to be extracted.
• The power drill pump must be mounted on a suitable wooden board with the mounting materials supplied.
• Caution: The power drill pump must be completely flush with the board. Make sure that the distance between
the power drill pump and the edge of the board is at least 5 cm.
• Caution: Failure to use the mounting material or the use of an excessively short support board can cause the pump and
power drill to turn on their own axis. This can cause the electric cable to break, producing an electric shock.
• Caution: The power drill may only be operated in clockwise rotation.
• The direction of flow is indicated by an arrow. Attach a suction and pressure hose. The pressure side must be open during
suction. The delivery rate can be regulated by the speed of the power drill. Switch off the power drill immediately once
the container is empty.

Translation of the original operating instructions

Hose Ø 1/2" Hose Ø 3/4"
30 m
15 m
24 m
t
Wear ear protection.
Wear protective gloves.
Pull out the mains plug
when not in use or if
damaged.
Maximum speed
of 2800 rpm, clockwise
rotation only.
24 m
–
18 m
5
Do not use in wet or
damp conditions.
Lubricate the power drill
pump regularly.
Caution: Not suitable
for poisonous, corrosive
or flammable liquids.
Not suitable
for foodstuffs!