Care And Cleaning - Salton HG-1008 Instruction Booklet

CARE AND CLEANING

1. Unplug the Grill from the wall out and allow it to cool completely.
2. Remove the Drip Tray and dispose of waste. The Drip Tray can be washed in
warm soapy water, rinsed and dried or placed on the top rack of the dishwasher.
3. Remove the Grill Plates (see below) and wash in warm soapy water. Rinse
and dry. Do not place the Grills Plates in the dishwasher.
4. Wipe exterior Grill surfaces with a damp cloth.
DO NOT IMMERSE GRILL IN WATER OR ANY OTHER LIQUID.
5. Reassemble the Grill when the Drip Tray, Grill Plates and Grill are
completely dry.
NOTE: Do not use the front handle when moving or storing the Grill. The cool
Grill should be handled by grasping both sides. Store in a clean dry place.
Removing the Grill Plates
Top Grill Plate: Place your thumbs on the plastic housing
and your index fingers on the tabs of the Top Grill. Pull
forward with your index fingers while pushing with your
thumbs. The Top Grill plate will pop out of the locked position.
Bottom Grill Plate: Place your thumbs on the plastic housing
and your index fingers on the tabs of the Bottom Grill Plate.
Pull up with your index fingers while pushing down with your
thumbs. Grill plate will pop out of locked position.
Assembling the Grill Plates
NOTE: The Top and Bottom Grill plates are not interchangeable. The Bottom
Grill Plate has only 3 raised sides. The 4th side allows fat to drain into
the Drip Tray.
Top Grill Plate: Slide the two tabs at the back edge of the Top Grill Plate
into the holes in the inside hinge. Squeeze the Top Grill Plate and the Cover
of the Grill together until it locks into place.
Bottom Grill Plate: Slide the two tabs at the back edge of the Bottom
Grill Plate into the holes in the outside hinge. Press down until the Bottom
Grill Plate locks into place.
6