Kärcher WT 5 Original Instructions Manual page 20

The device has 4 modes at disposal.
Automatic irrigation
–
With this function watering periods can be set individually and the watering is
automatically activated and deactivated.
Manual irrigation
–
With this function the watering is manually switch on or off.
Countdown function watering
–
With this function the watering is automatically switched off after a desired pe-
riod of time (max. 120 minutes).
Interruption of the watering
–
With this function the automatic watering is intermitted for 24 hours.
 The tap must be closed.
 Screw the coupling element onto the hose connection.
 If necessary, screw the reduction piece onto the water connection.
 Hold the valve unit on the casing and screw the water connection onto the water
tap.
CAUTION
Never connect the watering device to the water tap without using the supplied filter
seal.
20 English
Function
Before Startup
Preparation control unit
Note: The battery is not included in the scope
of delivery.
 Insert the battery into the battery com-
partment in the correct position (+/- mark-
ing).
 As soon as the battery is inserted, the
display changes directly into the settings
mode for the current time and day of the
week after a short self-test. The hours of
the time display are flashing.