Intended Use; Package Content; Required Accessories - GRAUPNER Kingpad mc-edition mc-16 Manual

Bus system control pad for installation
Table of Contents

Advertisement

Intended use

Package content

Required accessories

6 / 16
The Kingpad mc-edition regulates and controls the lighting and spe-
cial functions in a vehicle model over only 1 channel of the transmit-
ter.
The Kingpad mc-edition is designed exclusively to be used in bat-
tery-powered, radio controlled models, any other use is not allowed.
For any improper use no guarantee or liability is assumed.
Read through this entire manual before you attempt to install or use
the Kingpad mc-edition.
Graupner constantly works on the development of all products; we
reserve the right to change the item, its technology and equipment.
Target group
The item is not a toy. It is not suitable for children under 14. The ins-
tallation and operation of the Kingpad mc-edition must be perfor-
med by experienced modellers. If you do not have sufficient
knowledge about dealing with radio-controlled models, please con-
tact an experienced modeller or a model club.
 Kingpad mc-edition with connection cable and ZH connector
 Manual
Graupner Kingpad light module (No. 3974.1)
Adapter mc-26/mc-28 (No.3974.3) with mc-16/mc-20 (No.3974.4)
Kingbus Central Module (No.3975)
LEDs for model lightning.
The IRAM Module so as IR-TX are required to use the functions pad.
Please refer to
www.pistenking.de
3974.2_MP_V1

Advertisement

Table of Contents
loading

Table of Contents