Display Setting; Audio Setting - Sylvania DVC865G Owner's Manual

B

DISPLAY Setting

You can change the display functions. Follow steps 1 to 3 in the "CUSTOM Menu" section on page 20.
4
Select the desired item.
or
DISPLAY menu
SETUP DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
Hint
TV ASPECT:
• Select "4:3 LETTER BOX", so that
black bars may appear on the top
and bottom of the screen.
• Select "4:3 PAN & SCAN" for a
full height picture with both sides
adjusted.
• Select "16:9 WIDE" if a wide-screen
TV is connected to this unit.
STILL MODE:
• Select "AUTO" usually.
• If you select "AUTO", automatically
select the best resolution setting
(FRAME or FIELD) based on the
data characteristics of the pictures.
(default)
• If you select "FIELD", the picture in
the still mode will be stabilized.
• If you select "FRAME", the picture in
the still mode will be highly defined.
• An individual picture on TV screen
is called a "frame", which consists of
two separate images called as "field".
• Some pictures may be blurred if you
select "AUTO" in the still mode due
to their date characteristics.
C

AUDIO Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3
in the "CUSTOM Menu" section on page 20.
4
.
Select the desired item
or
AUDIO menu
SETUP AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
E8A00UD_E8C00UD.indd 21 E8A00UD_E8C00UD.indd 21
5
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See Hint on the left.
TV ASPECT
TV ASPECT 4:3 LETTER BOX
4:3 LETTER BOX
STILL MODE AUTO
4:3 PAN & SCAN
ENTER ENTER ENTER
PROGRESSIVE OFF
16:9 WIDE
STILL MODE:
(Default: AUTO)
See Hint on the left.
STILL MODE
TV ASPECT 4:3 LETTER BOX
AUTO
STILL MODE AUTO
FIELD
PROGRESSIVE OFF
ENTER ENTER ENTER FRAME
PROGRESSIVE:
QUICK
(Default: OFF)
See Hint on the right.
TV ASPECT 4:3 LETTER BOX 4:3 LETTER BOX
STILL MODE AUTO AUTO
PROGRESSIVE OFF
ON
ENTER ENTER ENTER
If there is no picture
Before proceeding...
or you do not press
1. Make sure your TV has progressive scan.
2. Connect with component video cable
any buttons for 15
NOTE: If there is no picture or picture is
distorted after selecting 'YES',
wait about 15 seconds for auto recovery.
seconds, Progressive
A c t i va t e P r o gr e s s i ve ?
scan will switch to
SELECT: K / L
"OFF" and it will exit
the setup menu.
Confirm again to use progressive scan.
If Picture is good, select 'YES'.
SELECT: K / L
5
DRC (Dynamic Range Control):
(Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER ENTER ENTER
DOWN SAMPLING:
(Default: ON)
Set to "ON" when outputting in 48kHz.
Set to "OFF" when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER ENTER ENTER
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to "BITSTREAM" when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs a Dolby Digital Signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER ENTER ENTER
– 21 –
Select the
desired
setting.
ENTER ENTER ENTER
or
Select the
desired
setting.
ENTER ENTER ENTER
or
SETUP
Select "Yes".
or
NO
YES
SET:ENTER
ENTER ENTER ENTER
Select "Yes".
or
NO NO
YES YES
SET:ENTER
OFF
ON
BITSTREAM
ON
OFF
BITSTREAM
ON
ON
PCM
6
To exit
the TV ASPECT or
STILL MODE screen
SETUP
To complete the
PROGRESSIVE setting
ENTER ENTER ENTER
Hint
PROGRESSIVE:
• You can set "PROGRESSIVE" to
"OFF" in the DISPLAY menu or
press and hold [PLAY B] on the
front of the unit for more than 5
seconds during playback, so that
the PROGRESSIVE SCAN
indicator on the front panel
lights off.
• When "PROGRESSIVE" is "ON",
video signals from the unit's
VIDEO OUT and S-VIDEO OUT
jacks will be distorted or not be
output at all.
6
To exit the menu
SETUP
Hint
DRC:
• This function is available only on
the discs which are recorded in
the Dolby Digital format.
DOWN SAMPLING:
• When playing back a 96kHz disc
with the copyright protection,
or when Virtual Surround is set
to "1" or "2", the sound will be
down sampled at 48kHz and
output as digital audio even if
the "DOWN SAMPLING" is set
to "OFF".
• This function is available only
on digital outputting of a disc
recorded in 96kHz.
EN
2006/08/18 13:11:32 2006/08/18 13:11:32