Lennox Merit Plus Series Installation Instructions Manual page 31

LENNOX HEARTH PRODUCTS • MERIT PLUS
2
4
5
Figure 57
DIRECT VENT GAS FIREPLACES (MPDP35/40) • INSTALLATION INSTRUCTIONS
®
MPDP40 LOG PLACEMENT
1
3
Catalog Number for the entire log set: 24M25
Position the individual logs as shown below. Logs should be placed
in the order shown. Position the center log on the burner first, then
place the glowing embers as shown in Figure 55. Place the rear
log, both the right and left, and then the smaller left and right top
logs. All logs that have notches to fit over the grate tines should
be positioned with these notches directly against the grate. All top
6
logs that rest on lower logs, do so over flattened mounting faces
in the bottom logs.
Proper log and twig placement is critical to encourage outstanding
flame appearance and prevent sooting.
1
4
2
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Log
Number Description (Stamped #)
1 Log, Center (39-8)
2 Log, Rear (138)
3 Log, Right (39-10)
4 Log, Left (39-9)
5 Log, Top/Left (39-11)
6 Log, Top/Right (39-11)
5
3
6
31