Information about the documentation About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. •...
Page 6
The type designation and serial number are printed on the rating plate. ▶ Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product. Product information...
Page 7
▶ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. ▶ Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Page 8
Electrical safety ▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes. External metal parts of the power tool can become live, presenting a risk of electric shock, if you accidentally damage an electric cable. Careful handling and use of electric tools ▶...
Items supplied Breaker, operating instructions, cleaning cloth, grease. Other system products approved for use with this product can be found at your local Hilti Store or at: www.hilti.group. Technical data...
1. Apply a little grease to the connection end of the accessory tool. ➥ Use only genuine Hilti grease. Use of the wrong grease can result in damage to the tool. 2. Pull the accessory tool release ring back and hold it securely.
Page 12
Fitting the side handle (optional) 1. Release the side handle clamping band by turning the handle grip. 2. Slide the side handle clamping band over the chuck from the front and into the recess provided. 3. Adjust the side handle to the desired position. 4.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Store or online at: www.hilti.group.
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
Need help?
Do you have a question about the TE 500-X and is the answer not in the manual?
Questions and answers