Initial Operation; Preparation Of Coffee; Practical Hints - Team KM 1 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
Fax +32 2 359 95 50
FIELD OF APPLICATION/OF OPERATION
Use the appliance for domestic purposes only and in the way indicated in these
instructions.
This appliance is intended to be used for domestic applications and similar applications
such as:
Kitchen corners reserved for personnel in shops, offices and other professional
environments;
Farms;
The use by clients of hotels, motels and other environments with a residential
character;
Environments of the "bed and breakfast" type.

INITIAL OPERATION

When you use your appliance for the first time, pour fresh water into the water tank and switch
on the appliance (without coffee).
Once all the water has passed through, switch the appliance off and let it cool down. When it
is cold enough, repeat the process with fresh water. Repeat this process 3 times.

PREPARATION OF COFFEE

Open the lid of the water tank.
Pour the desired amount of water into the water tank. Make sure not to overfill by
respecting the maximum level indicated on the water tank.
Swing the filter holder, insert a paper filter or permanent filter (depending on the model)
and add the desired quantity of ground coffee. Replace the filter holder, making sure it is
placed correctly.
Never forget to close the lid of the water tank before switching on your coffee maker.
Switch on the coffee maker. The pilot light of the switch will be illuminated, indicating that
your appliance is working. Thanks to the keep warm function, your coffee is warmed up as
long as the appliance is switched on. Note that the appliance will be switched on as long
as you do not switch it off manually. We advise you to not let the appliance switched on
for more than 2 hours and make sure that you never let an empty jug on the appliance.
When you remove the jug from the appliance, a non-drip valve will automatically operate
to stop any drops of coffee dripping onto the hotplate. Replacement of the carafe
automatically opens the non-drip valve and allows remaining coffee to filter through into
the jug.
Once the water tank is empty, we advise you to wait until the brewing process has finished
and the filter has run empty before removing the jug.
DECALCIFICATION AND CLEANING
Decalcifying the coffee maker prolongs its life span. For decalcification, only use products
especially made for the decalcification of coffee makers. Guarantee claims will not be
accepted for appliances that have not been descaled.
Never use a dishwasher to clean the jug. Just clean it in soapsuds.
To clean the plastic parts of the appliance, use a humid, non-abrasive cloth.

PRACTICAL HINTS

When you notice that the coffee making process is longer than it should be, it is probably time
to decalcify the appliance. Do not wait until the situation gets worse. The decalcifying
frequency depends on the amount of lime in the water and therefore can be different from
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
6
Assembly page 6/28
TEAM KM 1 - 090421

Advertisement

Table of Contents
loading

Table of Contents