Using Time Search; Marker Setup; Using [Search Mode]; P Ress [Search Mode] - Sylvania DVL245G Owner's Manual

Search Function

Using Time Search

1
P ress [SEARCH MODE]
repeatedly until the Time
Search display appears
during playback.
SEARCH
MODE
PLAY
STOP
TOTAL 1:29:00
Hint
• When there is no need to enter a number, "0" appears automati-
cally.
- --
For example, "0 : 0 : " appears in the Time Search display if the
total time of the title or track is less than 10 minutes.
• Press [CLEAR] to erase the incorrect input at step 2.
2
P ress the desired time
location on the disc, using
the Number buttons within
0 seconds.
1 2 3
4 5 6
7 8 9
0
1:29:00
TOTAL

Marker Setup

This feature allows you to assign a specific point on a disc to be
called back later.
To set a marker
1
P ress [SEARCH MODE] repeatedly until the marker display
appears during playback.
SEARCH
PLAY
STOP
2
U se [s / B] to select the
markers.
ENTER
To return to the marker later
1
P ress [SEARCH MODE] repeatedly until the marker display
appears.
SEARCH
MODE
2
U se [s / B] to select
markers.
ENTER
To exit the marker display
1
P ress [RETURN
Hint
• Opening the disc tray or putting unit in standby mode will erase all markers.
• Selecting "AC" at step 2 in the section "To set a marker" or "To return to the
marker later" will also erase all markers.
• To clear a marker, select the marker to be cleared at step 2 in the section "To
set a marker" or "To return to the marker later," and then press [CLEAR].
• The marker display will disappear in about 0 seconds when there is no out-
put.
-11-
MODE
3
P ress [ENTER] to set the
markers.
ENTER ENTER
3
Playback will restart from
the specific point which
you have set as the
desired marker.
ENTER ENTER
] to exit the marker display.
RETURN
EN