Sony HDCU-F950 Installation And Maintenance Manual page 60

Page 12
Slot-5 Diag Dispaly
Displays the details of self-diagnosis of the FC-94 board of
the unit.
* Slot-5 Diag *
Front: FC
IN :1080/59.94I
OUT :1080/59.94I
PLD V1.00 Config Done
Mode Normal
Rear: HIF
No. Contents
1
State of the MAIN INPUT signal format of the frame
converter
2
State of the conversion format of the frame converter
MAIN OUTPUT signal
3
Displays the state of the PLD (IC200 on the FC-94 board)
version and PLD. (Config Done/Config NG)
Config Done : PLD (IC200 on the FC-94 board) started
correctly.
Config NG : PLD (IC200 on the FC-94 board) did not
start correctly.
4
State of the operation mode on the FC-94 board (Normal/
Test)
5
Displays when the HIF-16 board is installed in the rear
correctly.
3-10 (E)
Page 13
Slot-6 Diag Dispaly
Displays the details of self-diagnosis of the circuit board
that is mounted in the sixth slot from the left of the front
side of the unit.
n
No circuit board is installed at present.
1
2
Front: None
3
4
5
Rear: None
Page 14
ROM Version Dispaly
Displays the ROM versions of the unit and the peripheral
equipment of the unit.
CHU
CCU
MSU
No.
1
2
3
* Slot-6 Diag *
* ROM Version *
HDC-F950
1.20DM01
HDCU-F950
1.02
MSU-700A/750
1.10
Contents
Displays the ROM version of the HDC-F950.
Displays the ROM (IC510 and IC553 on the AT-149A
board) version of the HDCU-F950.
Displays the ROM version of the equipment that is
connected to the RCP/CNU connector on the rear panel
of he HDCU-F950.
1
2
3
HDCU-F950 IMM